zapdbf Member Joined Mar 24, 2011 Messages 38 Reaction score 0 Location Ohio Feb 21, 2018 #1 I have replaced all the caps and ic301 and I cannot adjust it out. also the vertical and horizontal signals are perfect beautiful square waves. Frustrated on this one any help ? Attachments IMG_2084.jpg 500.4 KB · Views: 40
I have replaced all the caps and ic301 and I cannot adjust it out. also the vertical and horizontal signals are perfect beautiful square waves. Frustrated on this one any help ?
OP OP zapdbf Member Joined Mar 24, 2011 Messages 38 Reaction score 0 Location Ohio Feb 27, 2018 #2 bump any help ?
JamBurglar Well-known member Joined Mar 8, 2010 Messages 7,631 Reaction score 2,173 Location Virginia Feb 27, 2018 #3 No clue but hopefully someone will chime in.
esqueleto Well-known member VAPS Joined Nov 18, 2012 Messages 2,178 Reaction score 280 Location Michigan Feb 27, 2018 #4 Problem with the yoke.
esqueleto Well-known member VAPS Joined Nov 18, 2012 Messages 2,178 Reaction score 280 Location Michigan Feb 27, 2018 #5 I had a very similar issue. I couldn't find any shorts or open paths, so I just put a new yoke and it solved my issue.
I had a very similar issue. I couldn't find any shorts or open paths, so I just put a new yoke and it solved my issue.
montech New member Donor 2012 VAPS Joined May 6, 2012 Messages 22 Reaction score 0 Location Prescott Valley, Arizona Feb 27, 2018 #6 When you adjust the vertical hold, do the lines flow with the rolling video or do they stay in the center of the screen?
When you adjust the vertical hold, do the lines flow with the rolling video or do they stay in the center of the screen?
ecwestjr Well-known member VAPS Joined Sep 22, 2013 Messages 2,922 Reaction score 239 Location lexington, Kentucky Feb 28, 2018 #7 A picture of how your sync is connected and of the chassis will be helpful.