1940 in 1 will not boot. HELP!!

musicman282

Active member
Joined
Jul 24, 2010
Messages
891
Reaction score
43
Location
Akron, Ohio
I purchased a 1940-in-1 board off here a month or so ago and it worked fine for a week. I dropped a screw driver into the fan while trying to install it in my cab and it cracked some of the blades on the CPU fan. I didn't end up mounting it in the cab because of the noisy fan and was playing it with the board sitting on a table and it fell off the table due to vibration. This damaged some of the traces on the top board which I fixed this week. I think in the process of trying to see if the traces were bad I ended up corrupting the hard drive. I need a new HD image in order to test to see if the top board is bad and I'd hate to spend 50 or so bucks at paradise arcade to get a new HD image only to find out my top interface board is dead. I much rather spend that 50 bucks toward a JPAC and run a standard mame set up. I need to get this done cause I need to get this cab out of my garage before winter and a guy at work is waiting on it. I didn't just go with Mame originally because it's a pain in the ass to configure for someone that isn't good with computers and I find myself having to do too many service calls.

Anyone have a 1940 in 1 image or any games family HD images they can share with me so I can test my board??

I'd really appreciate it.

I already posted on xxxx-in-1.com last week and haven't received one response so I figured I'd try my KLOV friends.
 
Back
Top Bottom