19" Z-Back Cabinet Marquee

arcadeaction

Well-known member

Donor 2013-2014
Joined
Oct 3, 2013
Messages
2,216
Reaction score
295
Location
Gainesville, Florida
I picked up what essentially appears to be a 19" Z-Back cabinet. I hadn't ever seen one before. It is essentially like the 25" Z-Backs commonly used for Street Fighter 2 but this one does have an easy method for rotating the monitor. There is absolutely no back door and the front control panel slides out with a drawer just like an HS-5 Dynamo cabinet (and perhaps the 25" Z-Back).

My question: Just wondering how one would remove the marquee on a 19". I see no screws of any kind that would allow for removing a marquee bracket.
 
Update: apparently the marquee is just installed from the bottom up and no brackets need be removed. The top marquee groove goes up a bit and then gravity just holds the marquee in place. A label inside says "Area Cabinets" with an address in East Chicago, Indiana.

Not only does the control panel slide out like a 25" Zback, but the control panel wood itself can then be slid out to exchange with another control panel quite easily by just disconnecting the cp harness molex connector. Within a couple minutes you could transform this from a vertical two button game to a horizontal six button game (or a trackball or spinner game or what-have-you). Quite the versatile cabinet actually.
 
Back
Top Bottom