19" WEI-YA flat screen monitor, can't center pic

coinopshop

Well-known member

Donor 2020, 2023
Joined
Apr 3, 2008
Messages
2,157
Reaction score
407
Location
Forty Fort, Pennsylvania
19" WEI-YA flat screen monitor, can't center pic

This one is strange.

After plugging the machine in the pic comes up WAYYYY off to the right side of the screen. By using the OSD controls, I can center the pic.
But....it only stays like that for a few minutes then pops right back off to the right side of the screen. Anyone have this problem before ? Is it common with the WEI-YA brand flat screen monitors ?

Thanks,
Dave.
 
Hmm. The reason I was asking is because I recently ran into this with a 60-in-1 using the VGA output, and the problem turned out to be the 60-in-1 board - not the monitor....
 
Hmm. The reason I was asking is because I recently ran into this with a 60-in-1 using the VGA output, and the problem turned out to be the 60-in-1 board - not the monitor....

Had the same problem with a 60-1. Wasn't the pcb though, just didn't agree with the brand monitor I was using.
 
Back
Top Bottom