FS Parts: 19" Vision Pro & Wells monitor chassis

Trackball

Well-known member
Joined
Oct 1, 2006
Messages
4,519
Reaction score
361
Location
Travelers Rest, South Carolina
Rating - 96.2%
25   1   0
While moving stuff in the warehouse I broke the neck on this Vision Pro so here is the monitor chassis. Monitor picture looked great before the break though the tube had some burn. This is a clean used working chassis. Comes with remote adjustment pcb. $60 shipped

Also necked at 19" Wells Gardner K7000 series. Super clean chassis on that one as well. Comes with remote adjustment pcb. Working. $60 shipped
 
the K7000's with the remote board were thick neck CR23. I'm looking for the one with two cables out of the flyback. Can you take a pic of the Chassis? If it's the double wire one, I want it.
 
the K7000's with the remote board were thick neck CR23. I'm looking for the one with two cables out of the flyback. Can you take a pic of the Chassis? If it's the double wire one, I want it.

the double wired one is a k7000a or 447c/d chassis. just curoius why you need those since they all 19's small neck chassis can be used.
 
Back
Top Bottom