19"K7000 dead after cap kit, 135vdc on both sides of R301 but VR is good

Xyla

Active member

Donor 2011
Joined
Apr 19, 2011
Messages
964
Reaction score
152
Location
San Antonio, Texas
19"K7000 dead after cap kit, 135vdc on both sides of R301 but VR is good

I'm about to throw this chassis in the trash.

New f
 
have you tested R301 out of circuit and see if you have 220 ohms??
 
Weird, part of my post was posted twice.

The original R301 I had is reading 197 ohms out of circuit. I swapped the whole resistor assembly and it's doing the same thing.
 
All the chassises I am working on at the moment seem to be the same... a 220 ohm 15 watt with a smaller 1.8k in parallel.
 
Back
Top Bottom