1066 in 1 1069 in 1 monitor questions

Black Matrix

Well-known member
Joined
Dec 21, 2006
Messages
3,290
Reaction score
35
Location
Greeneville, Tennessee
Hey all,
I am still working through a 1069 in 1 conversion. Today, I returned the would-be cab (a nice Naomi Universal running Zombie Revenge) back to working order. Now that we know that all is working in the cab as it should, I need to tackle the monitor. Its a Nanao (MS-2932-S I think). Its a nice looking 29" VGA(supposedly). The regular hookups is a standard 15 pin computer monitor cable. My question is can this plug be plugged directly into the video output of the 1069 board or does it need to be run through the video wiring on the top Jamma board. I read on one post that one of the small boards on the side can be uplugged and the monitor cable hooked directly to that. The board is like this one:

http://www.jammaboards.com/store/1069-in-1-games-family-multigame-system/prod_243.html

Can anyone who owns one of these verify this. I know I am making it harder than it is and I would really like to work out a conversion where the original Naomi hardware could be left in place with as little modifications as possible. I just thought there might be some wiser souls out there who could help. And as always, thanks in advance.
 
Back
Top Bottom