1055/1 Board will not start

Quazimoto

New member
Joined
Apr 23, 2002
Messages
1,579
Reaction score
1
Location
Long Island::NY
Anybody ever have trouble with these boards not starting??? I have an older 1055/1 multi board and when I turn the cab on it will not start. If I keep turning it on and off I will eventually hear the PS kick in and it starts to boot up. Not good if your trying to sell it . =(

I tried it today and it didnt start after about 10 attempts......I let it sit for an hour and just turned it on and it started.
 
Last edited:
Sounds like a power supply issue. These are simply PC's with a JAMMA I/O board slapped on. I've had more than one PC do exactly what you're describing before finally taking a dump. The power supplies that come with these boards are just short of worthless...
 
Sounds like a power supply issue. These are simply PC's with a JAMMA I/O board slapped on. I've had more than one PC do exactly what you're describing before finally taking a dump. The power supplies that come with these boards are just short of worthless...


Yeh those power supplies are not the greatest. Buy a cheap one from Jameco Electronics.
 
I had a loose wire at the 20 sumthin pin connector. Didnt identify the cause till it left a black burn mark on the connector. The wire broke at the crimp/solder. Fried that pin so I bypassed it and it works great.
 
Back
Top Bottom