$100 Joust -> need some opinions...

kags1969

New member
Joined
Oct 23, 2009
Messages
25
Reaction score
0
Location
Sunset Valley, Texas
I just scored a non-working Joust cab with a great CP and ok side art... The monitor comes on but no game or diagnostics... nada. The guy says he thinks it is a bad ROM3 chip, but he was unsure.

I also purchased a JROK multiwilliams...

I dont want to jack a perfectly good Joust CP... so I'm thinking I should maybe sell it.. what is the going rate for a B+ Joust CP?

Is there a good multiwilliams/joust CPO available? If so from who?

I am thinking about just wiring in the Jamma Harness and leaving the original Joust stuff intact for postarity. Can I used the williams powersupply for the Jamma harness?

Any input is appreciated...

Kags
 
Is there a good multiwilliams/joust CPO available? If so from who?

Kags

I created this file and sent to Rich at This Old Game. Patiently waiting for the CPO. Should be getting it soon.

Someone around here was mfg metal multi/williams cps. If I had to do it again, I would buy one of these. I wouldn't hack-up the wood cp. I spent waaay too much time on mine (patching, bondo, sanding, drilling, etc...).
 

Attachments

  • Screen shot 2010-04-29 at 7.52.14 PM.jpg
    Screen shot 2010-04-29 at 7.52.14 PM.jpg
    20.4 KB · Views: 25
Back
Top Bottom