FS Game: 10+ games, Galaga, Gauntlet II, NARC, DK3, Paperboy,

vintageamuse

Permanently Banned - Proven known scammer beyond a
Joined
Mar 17, 2010
Messages
196
Reaction score
0
Location
Maine
Rating - 100%
8   0   1
10+ games, Galaga, Gauntlet II, NARC, DK3, Paperboy,

Got several arcade games I want to sell quick as I need to raise some cash. Had to replace transmission in my truck, repairs on my house, many unforeseen expenses...I will add more prices, pics and details. But feel free to email or preferably call me. I will consider offers, especially for multiple purchases. Have not extensively gone through these games, all being sold "as is" with no guarantees. I did not check lights, coin mechs and other smaller details, just if the game works and plays. Located in Windham, ME 04062 near Portland. I'm 45 minutes from Portsmouth, NH, hour and a half from Boston, 3 and a half from Hartford, CT. I can deliver along I-95 and I-495 all the way to Boston area for $75-$100. Freight shipping at very low cost also available, I can ship to many places in the U.S. for under $150. Call or email me, Andy 207-712-3959.

Paperboy - $350
Game is working, I tried to show all the flaws with the pics. The control panel and marquee look really nice. Handle bars move smoothly and also seem to be in great shape. The cabinet is rough. There is no moisture damage at all so it is solid. It has a part of the wood busted off on the left curve of the panel which will take some work to repair. Same location on the right side is slightly separated from the cabinet. It does push back in place and can be repaired. There are some bits of sideart missing, but it's 90% there. Some rough edges on the bottom of the cab. It has a switching power supply wired in, but the original power supply is also still there except one fuseholder is missing. Circuit boars are clean, no hacks and ran fine for the several hours it was left on, goes into the test mode, etc... I'd like to sell the entire game but suspect I'll get a bit more dough if I part it out,...? Anyway there are several people interested, so contact me asap before its gone!
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940692_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940712_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940728_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940867_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940896_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940920_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940945_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940968_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540940983_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941001_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941027_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941051_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941080_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941105_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941155_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941181_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/540941208_o.jpg

Galaga - $400
Working and plays great, nice picture with no burn. There is some wood expansion from moisture on the bottom and the back edges, but cabinet is still together solid. The artwork has some small areas that wore off, but it is 90% there and is decent. Back door is missing, if needed I'll cut some mdf and screw it on for $25.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514945_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514987_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515035_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515078_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515120_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515149_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515186_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515226_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515255_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515293_o.jpg

Punch Out - $350
Working, controls and sound are great, top monitor not displaying any green, bottom monitor has jailbars. Cap kits should take care of both I believe and if you want me to do them for you, I will do so for $100. There is no sideart. There are some scratches on the plexi. Nice cabinet, nice cp, nice marquee, decent t-molding. Missing back door, will install mdf for $25.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515882_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515837_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515784_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515751_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515717_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515677_o.jpg


Make Trax(Cocktail) - $300
Game is working perfect, nice monitor. Cabinet has some laminate that is cracked, see the pics. Missing monitor plexi.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723648_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723677_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723703_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723726_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723750_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723770_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539723793_o.jpg


Gauntlet II - $700***(SOLD)***
Working almost perfect, switches on joysticks need to be adjusted for more accurate moving but they all work. Nice picture with Gauntlet screen burn, does not affect gameplay. Left sideart has some pieces missing, about 80% there. There are some scuffs on the front bottom edge and several small lock bar holes. Nice MQ and CP. Missing back door, will install mdf for $25.

Arkanoid Cocktail - $350
Working but monitor needs to be capped. Spinners work well but have their trademark grinding noises. Cab is in nice shape.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514506_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514543_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514577_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514605_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514640_o.jpg

Monaco GP Cockpit - $100
Power comes on, it makes the engine revving noise, but that is it. Have not explored any further. Pretty nice cabinet other than being quite dusty. Complete other than missing gas pedal(the lever it attaches to is there), nice monitor with no burn. Might part out if no takers so lmk if any parts are wanted.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515617_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515594_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515563_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539515645_o.jpg

Donkey Kong 3 - $200
Complete, no power. Going off my poor memory, believe the monitor is good but pcb was bad. Pretty nice cabinet with sideart, some scratches on bezel, t-molding beat up, certainly restorable. I might get it running before it gets sold.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514757_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514798_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514824_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514853_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514898_o.jpg

Donkey Kong Jr.(Cocktail) - $250
Complete, nice cabinet, monitor is good. I may have swapped in a bad but clean and repairable pcb, or I swapped the power supply. Might work on this one before it sells.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514669_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514695_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/539514726_o.jpg

Hang On - $150
Nice cabinet, great picture and plays well. This one has been sitting here a long time... think the edge connector might need work cause the game was a bit wonky when I turned it on today, but was fine after messing with it.
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/447264893_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/447264842_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/447264788_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/447264738_o.jpg
http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/447264674_o.jpg http://img.auctiva.com/imgdata/3/6/4/9/3/5/webimg/447264609_o.jpg

I'm also looking to move these machines and will provide more details soon, though I will listen to offers in the meantime.
Donkey Kong 3 Complete
Paperboy complete, cab has damage but boards, handlebars are good
Karate Champ average cab, no sideart, works great
NARC original cab, nice shape, working great
Escape From Planet of Robot Monsters(conversion)
Satans Hollow Cocktail

more to come...
 
Last edited:
as stated in the post, pics coming soon...sorry for delay,
 
added pics, adjusted prices downward, more details added
 
Located in Windham, ME 04062 near Portland. I'm 45 minutes from Portsmouth, NH, hour and a half from Boston, 3 and a half from Hartford, CT
 
added more games, pics and lowered a few prices...
sale pending on Punch Out and 1 DK3
 
Finally posted pics of the Paperboy, price set at $350, want to sell complete game but may be worth more if parted out? I really need as much dough as possible. Hate to do it but having heat and foor for my kids is more important than this cabinet.
 
Back
Top Bottom