¢.25 lights?

iyouwas

Member
Joined
Nov 28, 2010
Messages
925
Reaction score
3
Location
Pittsburgh, Pennsylvania
I have a pacman power supply, with a ms pac coin door.
Would like to light up the 25 cent lights, but can't find where to run the power.
Any ideas?
If I were to purchase illuminated buttons, would it be the same power source as the 25 cent supply?

Thanks!
 
Yes you can run the same power for your lit cp as u run to the coin door- just make sure you use the same watt bulbs for both. I usually use the 5v wattage, not as bright, but bulbs last longer.
 
If you look at the fuses on the right of the power supply, two of them together measure 12 volts (measure between the two fuses on the top, and the two on the bottom). The ones that measure 12 volts, run that power to your buttons one wire from each side. You'll have to get lights that are capable of running off ac, some LED's won't. And of course you'll have to get 12 volt lights.
 
If there's not already power in the bundle to the coin door(use voltage meter to check, sometimes they were run but not used), then run back down to the power supply, you can verify voltages at the iso transformer if you're not sure which is which. once you find the 5v you can split it up as needed for your lights.
 
Back
Top Bottom