tron

So I picked up a Tron cab that was complete except for a PCB. It had the original MCR power supply which is still running with correct voltages and no hum. I picked up a PCB that was advertised as tested and working, put it in the machine and fired it up. All that's displayed on the monitor...

There are a couple of graphics issues and "bugs" I am experiencing with my Tron boards. I own 2 sets of boards and one was working fine. I switched out the ribbon cables and it developed a graphics issue on the MCP cone and Light Cycle Levels. The MCP cone was showing about every third gradient...

Atari Cone Buttons, Midway Harness, 7 Lbs. of Tokens,Tron Spinner Knob Cleaning out a few random Items that you may need. All items CONUS shipping included please add fees for PP or gift 3 Atari Cone Buttons and ? Harness (The Buttons test good the LED was not tested Harness was cut as shown)...

I gutted a Tron, I have the stuff. I try to save everything from one when I gut one. Let me know what you need. PM Me if you want something. I never know if people post under my post. Maybe there is a setting to tell me? lol. PCB $399 with new ribbon cables (just repaired/tested) One sold...

I need new speakers for my tron, the manual lists them as 6x9 4 ohm, 10 watt speakers. I can't find any, does anybody know where I can purchase a couple? I have found 8 ohm, 15 watt speakers. Can I use these instead?

I have a TRON control panel for sale in good condition. It has a new plastic handle and trigger switch and a nice tron decal. Spinner is in good shape and the control panel is quite clean. CPO has a small cig burn but is generally in good condition. I am looking for $190 + 35 shipping in the...

Cleaning up a Tron table top that a friend found in the attic. Overall in good shape, no battery acid damage, boards look nice and clean. But it will not power up. Any ideas on where to start? I've found repair sites for Coleceo table tops, but nothing for a Tomy Tron.

I'm not sure but maybe this is leaked from Tron 3?

Hello Everyone Unfortunately, I am forced to part out a Bally Midway Tron arcade game. The cabinet had the bottom missing and water damage too far up the sides for me to justify trying to bring it back. I have listed all of the parts that I am selling on Ebay. There are to many parts to list. I...

Hey all I have A Tron I'm trying to fix. I've replaced the ribbon cables and I have a new heavy duty switching power supply installed. When I power on it is kinda the right screen and the game will kinda play. But it is missing alot. Like no MCP, no spiders, no tron, no light cycles, no tanks...

Re: Robotron/Joust Harness Needed I am restoring a Robotron and I have everything for it except a harness. Getting a bit desperate for one.

Complete Tron upright wiring harness with power brick For Sale: Complete Tron upright wiring harness (unhacked) with power brick - $100 plus shipping Please send PM with any questions.

Tron Video Signal Troubleshooting - Only Wavy Screen Static I'm trying to troubleshoot what appears to be a possible Tron PCB board issue, but I'm not 100% certain. When power is applied, I only see what appears to be a bad video signal displaying on the monitor (see image below). I've...

Nearly done collecting my Tron parts; I do need the following: Marquee Upper plastic Translite Side Art Shroud art (I have the shroud) PCB Set

Re: Robotron/Joust Power Supply Restoring a Robotron and need the smaller metal plate, the one the power supply and sound board rest on. I also need a working power supply.

Wanted: does anyone manufacture or sell the clear plexi that is bent in the middle, that goes in the back of the Midway Tron shroud? It is a clear rectangle that right down the middle is bent about 10 degrees both ways. Does anyone have a NOS plexi? Any help would be appreciated.

Quick question: I am going through my boards using a known good SpyHunter CPU & Vid Gen board and hooked up to a working Spy Hunter machine. Got the switcher set so reading 5.05 across C1 on the SSIO's and that has been working so far. Have pulled all the socketed chips from a couple...

OK, first off.. I didn't ruin a Gorf to get a Tron joystick. A Tron control panel was sent to me. Blue handle and everything. But on inspection and disassembly I found that 1) The bottom part of the joystick assembly (where one would expect to see the switches) was much larger, and built for...

TRON MCR2 SSIO 12volt grounding problem. Looking for ideas Had a working Tron boardset. Swapped in an untested, but clean, SSIO board. At power up, L116 on the CPU board smoked. POOF! Traced where the 12v goes and from the CPU board it just jumps to the SSIO board via J2 (pins 11 & 12)...

WTB: Tron Joystick shaft actuating pin 0628-00700-00XF Looking for this part. It is piece 18 of page 5-20 in the TRON parts & op manual. Joystick shaft actuating pin 0628-00700-00XF Got a control panel with a joystick, but this part is sheared off. Going to need to tap out the remnant and...