pcb

WTB: Konami Sound PCB - Lethal Enforcers\Martial Champion Doesn't need to be working. Could also just take the whole game PCB if you don't have the sound board pulled separately. In that case I'd rather just get a nonworking game PCB so it's not as expensive.

Hi all, I'm looking for a fully working MK (Mortal Kombat 1) Y-Unit PCB. If you also have a sound board, ribbon cable, power cable, sound pot and harness, that would be great but not necessary. Thanks for your time. Regards, Jim -------------- Parts found outside of KLOV. Thanks everyone.

hi all.. As title - fully working, recently repaired and burn tested, working great (also with new AVG replacement in place). PM me offers? thanks

Whom currently makes the best Star Wars Interconnect PCBs? I recently picked-up a complete Star Wars boardset, minus the Interconnect PCB. I see High Score Saves and Amazing Arcading both sell them, but it seems like there are (perhaps were) others. As these are really simply PCBs, I suspect...

I got several PCBs from a warehouse and cannot ID a few of these. There are three boards that are pretty much identical that I have no idea what they are. There is basically no identifying marks except an assembly number 77002 on the top and also has an assembly number of 87002 on the bottom...

Got an X-men from a buddy recently that showing errors on the self check boot up screen as pictured below. Was told it was playing without audio but then completely stopped working. It's obvious the custom board was leaky so I suspected there was some damage to the traces and I ordered a...

I've recently acquired a new (to me) Pac-man mahine, it's an original cabinet with what looks to be a standard board but possibly with prototype Eeproms installed on to it. Instead of saying pac-man on the screen it actually says puck-man. But the most notable difference is the maze. Instead of...

Hi, I'm thinking of selling my TMNT PCB. Would anyone be interested? I'd be asking $400 shipped US with original marquee. It has the 2 player upgrade. I need Christmas money. Thanks.

Cheap! - Mylstar MACH3 LaserDisc main board on ebay now! If anyone is looking for the main board for a Mylstar MACH3 laserdisc game, there is one on ebay right now for $9.00. While it's not in great shape, the price is right for a repairable board (acid damage and missing PROMs). The seller...

Hey guys, I've been working on my X-men 6 player for a while now, had some issues with the audio so I got a chip replacement from Ian Kellogg and had it installed. I was hoping that would fix the issues but apparently it's more than that. On boot up the last 4 roms are bad, it says defective...

Atari Asteroids PCB repair so far: both start buttons lit, no video, spotkiller on, speakers humming, good voltages, 6502 pin 40 stuck low, B5 7404N has a wierd noisey low signals with logic probe on pins8,9, and 12 ... so the clock circuit seems to have issues... not sure about the crystal

Does anyone know what game this PCB is from? The board is marked Taito K1100429A / J1100182A Main PCB. The board also has a Romstar sticker. Any information is appreciated!

Greetings Everyone, So i have recently picked up a Gauntlet cabinet and was thinking of restoring it to its original glory, but from what i can tell the audio boards are somewhat hard to find. I wanted to see the amount of interest of people that would like to see an reproduction of these...

Lethal Enforer-- Gun, PCB or other issue causing this? Newbie from southern Ohio here looking for suggestions for troubleshooting and/or repair. Here's the problem. Game turns on with proper voltage. Both guns fire and aim fine in the gun test screen. During play, in any of the game scenes...

Donkey Kong (2) Board Set - Works Perfect - $200 shipped CONUS As the title says I have a two board DK stack on the metal mounting for sale for $200 shipped anywhere in the Continental US (anywhere else please ask and I'll look up shipping rate). Works perfectly just ended up with an extra...

Hi - I have a Carnevil PCB that powers/lights up, but appears to be running through a reset cycle. Also purchased a replacement hard drive. I need to get this fixed. I have reached out one technician for a quote but I only get an hourly charge with no price cap, so that doesn't work for me...

Hi - I have a Carnevil with a bad PCB. Looking to replace it with one that works. Please message me if you have a working Midway Seattle board, preferably a Carnevil PCB, but a Blitz would (should) do. Thanks.

My friend fixed a Space Harrier PCB in an interesting way I have an interesting space harrier PCB fix to document here (finally have permission to post this): My friend had a non working space harrier with a lot of graphical glitches, my friend is working in a place where there isn't a lot of...

Hi all, I'm looking for a 4 player GI Joe PCB. Working is preferred but does not necessarily have to be. Please let me know if you have anything. Thank you. Regards, Jim

Hi all, I'm looking for an Open Ice PCB. Please let me know if you have one available or can point me in the right direction. Thanks! Regards, Jim