Search results for query: *

Depends. It's also really easy to check a fuse. Just a suggestion.

Did you check if the fuse on the chassis is blown?

I believe it's a Well Gardner. Not sure the model. I think it's a u5000, not sure. How do I find out which model number it is? Also I think I see some areas that have a brown liquid at the base of the cap. Are these a concern? Finally does this chassis need an isolation block?

Wooops, I did drive. Thanks, I'll have to go back and adjust again. This one is hard because the cardboard really covers the pots. I have to go up and over the cardboard and down again and feel around to find the pots.

Yes thanks I did turn down the green and it definitely improved. This particular neckboard has two greens and two reds. Is that normal?

Just bought this arcade machine. Monitor looked off. Adjusted the focus on the flyback and that really helped, but it seems like there is a lot of green on the screen now. Here is the test pattern screen. Is this a convergence problem or a green problem?

Thanks everyone for educating me! I also watched some youtube videos on the subject and I think I will take everyones advice and just leave it alone. Thanks!!

Hi newb here so I'm going into this with no knowledge at all. I was inspecting one of my monitors I have and noticed at the start up screen the top corner white border kind of splits into green and red. Then I noticed in the game that same corner also gives the "push start" a green and red drop...

Thanks, I'm a novice, I like to learn. Saw something on this board that I wanted identified and looked abnormal compared to my other machines. Wondering if it could attribute to the issue I have while I'm waiting on parts to come in from your suggestion. I appreciate your help and yes I may ask...

Ok thanks. I do have a collapased image, it's just a straight line now going through the middle horizontally. Wonder if this part could be the culprit. Is there replacement transformers available?

I believe I have a k7000 monitor chassis and just saw this part on the board. Anyone know what it is and what it does and is it suppose to look like that. I have other K7000 boards and none of them have that yellow goo coming out of the top.

Thanks. Any ideas on how I can fix a vertical collapse?

Horizontally. It's set up for Street Fighter

There is a line going horizontally in the middle of the screen.

Also side note, just measured my power supply, it's outputing 13.4 volts on the 12v, is this within spec?

It's a K7000

I believe it's a standard jamma harness. It's connected to a CPS2 PCB Thanks I happened to order a cap kit because the vertical was rolling over, wonder if that just gave and the timing was just a coincidence.

So everything was working fine today. I decided to plug in a different PCB (pandora) into my dedicated cabinet. Turned it on, heard pop pop pop and smelled some smoke. Screen is black and only shows a single line in the middle. Switched back to original PCB and same thing black single line in...

Thanks, do you think that will be included in this kit? https://www.arcadepartsandrepair.com/store/components/capacitors/wells-gardner-k7000-series-cap-kit-105c/

@zenomorp any ideas on what I should do to fix this?