Search results for query: *

I made up a couple of sets of wooden T-Nut blocks to repair my Sinistar leg levelers. The blocks where the t nuts fit in were all beat up and caused the levelers to be very loose on my Sinistar. I made an extra set for my Joust but it turns out that I did not need to as the Joust was fine. I...

Hey guys! I have been on this forum for quite some time for arcade machines. I am brand new to pinballs and have no clue how to purchase one. I love Pulp Fiction and would love to buy the Bad Mother Flipper edition. I just need some purchase advise. Who are reputable dealers? Is there anyone...

I picked up a really nice Sinistar this past summer. Surprisingly, the monitor bezel is in super nice shape. There is only one small spot (maybe about 1/2 inch) of light blue that needs to be touched up on the left side. I attached a picture to this thread. Anyone know of a color match or a...

I made a wiring harness that connects a Williams 49 Way joystick to a JROK board. It works great. I had it in my Multi Williams until I found a dedicated Sinistar. Both proper connectors are there. You just need to hook the two loose wires to 5V (orange wire) and ground (spade connector). Once...

I have a nice condition hinge from a Spy Hunter upright control panel. I think (but not totally sure) that the hinge is the same for a sit down. I was able to polish the exposed hinge part pretty nice with some steel wool. See pics. How about $45 shipped via PayPal family and friends?

Here is a really nice Williams 49 way joystick. I took it all apart, cleaned it, lubed, and re-assembled it. I also installed a new stainless steel shaft and red ball top that are made and sold by @braedel ! It is tested and working. The joystick also comes with a working JROK harness. I had...

I just restored a Spy Hunter which came out super nice. Everything looks and plays great. The last part I installed was the coin door. Prior to installing the coin door, there was no hum coming from the speakers. Once I installed the coin door with lamps, there is a noticeable hum coming from...

I am having an issue with my Moon Patrol board set. The game plays great and the sounds work well. There are no graphics issues on level #1. When I make it to the second level, there are vertical lines through the background sprites. I attached some pics showing the issue. As you can see, level...

I have some left over parts from a multi game that I built a while ago. I have two black Ultimarc Mag Stik handles with black washers. I also have an extra mounting plate. I believe that the mounting plate can be used for mounting other joysticks. I can take measurements if anyone needs me to...

Here is an original upright Spy Hunter marquee. As you can see in the pictures, it is in really nice shape. There is minimal flaking on the edges. Just about all of the flaking will be covered by the marquee brackets. How about $110 shipped via PayPal family and friends? Thanks!

I am about to apply new side art on my Spy Hunter upright. The art from Phoenix (which looks amazing) has extra black on the edges that needs to be trimmed. I should have taken some quick measurements before I stripped the cabinet. Anyway, if anyone can give me a hand it would be appreciated...

I have a K4900 that has a super slight horizontal "Pin Cushion". It is so slight that I do not think it will be noticeable if I try and take a picture of it. The best way to describe it is if there is a perfect square (like in Robotron), the left and right side borders and bent very slightly...

I have an extra Williams test switch that is still attached to the bracket. It still has wires soldered to it. How about $30 shipped via PP family and friends?

I am almost done with a Spy Hunter restoration. I am just about ready to apply the new side art from Phoenix. I have never applied art this large before. Anyone have a suggestion of what type of tool to used in order to make sure there are no bubbles? I have a smaller plastic application tool...

Anyone have an old school Sinistar CPO that was made by Phoenix back in the day? I believe they were sold by QuarterArcade at one point. I just got my hands on a super nice Sinistar. This would be the finishing touch! Thanks!!

I just wanted to pass this information along to anyone who is restoring a Sinistar. I recently picked up a super nice condition Sinistar. It needed minor touch up on the blue and red parts of the stencil colors. Thankfully, no touch ups were needed with the gray parts! I was able to find exact...

I am trying to help out a friend who just picked up a free cabinet that has a multi board in it. Can anyone ID what multi board this is? Thank you!

I just picked up a really nice Sinistar. It has a pretty nice K4900 in it. The colors are nice but the picture is a little bit "off". The picture seems to be "twisted" a little bit counter clockwise. It almost seems as if at one point the yoke was loosened and spun a bit. I can't tell for sure...

I just picked up a Sinistar. One of the orange reject buttons has a hole drilled into it (see pic). Anyone have any laying around? Thanks!!

Hello! Anyone have a Sinistar for sale on the east coast? It does not have to be working. I am just looking for a nice original cabinet if possible. I am in New Jersey. Thanks!