Search results for query: *

Thanks, I'll give this a shot. Hooking up the Smash TV PCB to my Robotron monitor has revealed that the monitor is quite dim. Not so noticeable on Robotron since it's such a black-heavy game. Always something I suppose.

thank you!

I saw you wrote further down that this 19-in-1 board has a service switch on it--I have to look again since I couldn't find it. Otherwise, since I only need to use it this one time, I thought I could temporarily connect the service switch wire to the player 1 or 2 start button to get into the...

This is super helpful. Thanks. I have to see if this cabinet has anything wired to the test and service switch pins, which it may not. But thank you.

thanks - can I ask where you go that (I can't find it by searching what's printed on that), and I assume it involves soldering?

I only want to play Robotron on the 19-in-1 (the cabinet only has the two joysticks and no buttons so the only other game on there that's playable is Bubbles). I can't connect the player 1 buttons to the player 2 joystick because there aren't any actual player 1 buttons. If I follow your first...

I have a Williams 19-in-1 running Robotron in a cabinet with two joysticks. Left joystick moves player, right joystick fires. I put a RiddledTV JAMMA EZ Switcher in the cabinet to be able to switch over to Smash TV, which I have on a PCB. So Robotron --> Switcher --> controls/monitor etc...

Just got a new 2 slot cabinet. Having some monitor issues (dim, whole picture is a bit off horizontally), but I think the graphics look corrupted on my two cartridges although metal slug certainly seems more normal. I think. But both games having issues makes me think it's not the cartridges...

Thanks good to know. Having a hard time finding replacement pots for the upright.

Are the joysticks on the upright and deluxe the same/swappable?

I've finally gotten my monitor running on it. Couple issues: 1) During a game, sometimes when I press the red button to call for assistance in-game, it will immediately shut the game down (monitor stays on). 2) Joystick calibration is terrible, wiggles around, and in calibration the numbers...

I have a robotron cabinet with one of those 19-in1 boards set to boot only to Robotron (cab has no buttons besides the start 1/2). Is there a reason why I would NOT be able to use a 2 slot JAMMA switcher and put the current board in one a lot and a Smash TV PCB in the other? Current card shown here