Search results for query: *

Earthshaker 24,769,480 36,838,270 Will be traveling quite a bit for the next few months. May be a while before I can jump back in here. Have a great Thanksgiving everyone.

Here is the manual https://www.arcade-museum.com/manuals-pinball/T/Taxi_OPS.pdf If the switch is broken and you just need the switch and not the actuator (arm), then it is available here https://www.pinballlife.com/williamsbally-sub-microswitch-5647-12693.html You will need a diode with any...

Happend to me on a warm up game of TZ. 2.5 billion and got "lost in the Zone" twice.

Whitewater 830,451,350 2,007,798,710

Taxi 11,217,160 12,937,110

One of the reasons I love them. Pretty much only play System 11 these days

Earthshaker (personal best) - 40,748,200 FunHouse - 60,347,370

I guess it's just @DMT29 and me

Earthshaker 18,692,920 23,212,650

FunHouse - 43,320,390 Earthshaker - 29,945,000

Taxi - 14,156,580 The Addams Family - 392,144,430

Week 3 White Water - 675,653,450 Indiana Jones - 697,625,120

Week 2 Taxi - 14,891,420 Whirlwind - 60,015,310

TZ - 1,491,314,240 ES - 27,881,730

One good game, one okay game.

Had to bail out of town at the last second for an emergency. Earthshaker this week

I have and have owned mostly Williams System 11 and WPC games over 27 years. I have replaced more microswitches than anything else by a mile. Cleaning up weekend warrior hacks would probably be the second most frequent repair.

Because your game lamp sockets are wired differently. You can't change the polarity on a bayonet base bulb. You can change the polarity on a wedge base bulb. If you desoldered the wires on one of your bayonet sockets and switched them around, these bulbs would work. Comet pinball bulbs are...

Week 3. Shitty day at work, but good night to escape with the silver ball, evidently. Beat my all time best on FunHouse by 3 million FunHouse - 83,000,530 Whitewater - 884,449,940

You have the right wires going to the right lugs on the coil. The soldering on the violet and green wire looks cold (dull) and cracked. Hit that with some flux and flow some fresh solder on that connection. The stripped wire should go through the hole on the lug and wind around before soldering...