Search results for query: *

Looking for a yoke and boards for 25" Amplifone. Have the tube, etc already

Looking to get a price check on a Radikal Bikers. It's only been in a house, completely works, and has some the typical "moving" damage you would expect from a game of this age.

Looks like a Wells Gardner k4600

Looks like P4s are back in-stock P4 Pole Position Multigame PCB at Arcadeshop

Looks like P4s are back in-stock https://www.arcadeshop.com/i/1758/p4-position-multigame-kit.htm

I think someone already got it and they haven’t taken it down yet

You have picrures of the burned up ones?

SOLVED! BAD flyback. Unfortunately the malfunctioning flyback was new out of the box and I made the assumption that it couldn't be the problem,..lesson learned. Also, my normal flyback testing procedures (HV probe, HR Diemen flyback tester, and ring tester) did not catch this type of issue...

I've narrowed it down to either a flyback, neckboard socket, or neck board. The flyback I had in there was brand new and assumed it was fine, but when I swapped it out with a neckboard and flyback (older one with the white knobs) I had in inventory, I have no more jumpiness or wiggly lines. I'm...

Replaced the battery. 9.1vdc B+ reads 119. I did double check all the components around the power supply, including the filter cap and the Voltage regulator. Checked all the components around the oscillating circuit. Swapped out IC1 and IC2 I worked on a TV several months ago with something...

Should be able to see it now.

K7000 19" - Replaced all e-caps - new flyback - Tested this chassis on a different tube and yoke...same issue - Tested all pots Symptom: Jumpy screen and wiggly lines Outside of the upside down picture and purity issues (I'll fix those later), what could be causing this?

Thank you

I'm helping someone that has an multicade on their rental property. It "was" running (the on-board power supply fried) a JAMMA GAME KING 2100 IN 1 MULTI BOARD (G1S2p) and needs the board replaced. I'm unfamiliar with these, but they look to be a pc platform with the games loaded on a HDD and...

Hope this helps someone else Had a Galaxian with an old Wells Gardner k4500 monitor (original for the game). To install a k4900, I had to re-wire the monitor connector since there wasn't one of those small adapter PCB. Below is the original mapping and change needed to connect to a k4900 (or...

Bump!

No, not for sale.

I played Golden Axe recently and it's kinda grown on me. But I've seen those pcbs go for a pretty penny.

Thanks...I pulled that mk.zip from a MAME site. The odd thing is UG12's checksum is 0x04E0326D (from my chip which someone pulled from a different site) and the UG12 checksum from the mk.zip from MAME is 0x04E1326D I ran the mk.zip MAME on my advancedmame emulator and seems it's the right...