Search results for query: *

Power supply for Dexter installed and my NOS signed Marquee has come out of hibernation...

Harness and boards re fitting today. Still wating on the coin door to come back from coating.

Hopefully this is usefully to anyone renovating a DL. I wanted to replace my screen plexiglass and wanted to get the closest match to tint available. I have scanned the material with a VLT meter in a number of locations and averaged out the values, which ranged from 14.2% to 15.4%. It comes in...

Finished Cab.

Vinyl install today. Made a template for both sides of the cabs internal sides and fitted T molding. Harness install and power supply tomorrow...

Thanks Shaun yes looks like they did get swapped.

Im a bit confused can somebody help. This is the NPT board and the callout on the mounting states 5.0 amp fuse for F1 then F2 & 3 have 2amp. But the board is printed with F1 at 2 amp. Should there be a 5.0amp fuse in F1? I pulled the curent fuses and there is a 5 amp on F2 and F1 and 3 have 2...

Bondo work and sanding all day...

Yes that was my problem hahah

I used Graphit 33 as Slip Plate was not available in the UK where the game is located. https://docs.rs-online.com/c39a/0900766b8159beb7.pdf

Well masked it off and polished up the dag strap then sprayed it. Waiting for it to cure now before re assembly. This dried very fast but was very easy to wipe off to begin with. As its curing its becoming much more durable. Fingers crossed it works.

thanks for the info

Thanks for the info. Its £22 so about $27 a can for 200ml or 6.7oz. Actually looks like you can get it here: https://www.silmid.com/us/coatings/conductive-coatings/kontakt-chemie-graphit-33-conductive-coating/?currency=usd&countrycode=US&languagecode= For $18.

Please could I get some advice. So the guy helping me clean my monitor has got a little...um... too far and removed a good chunk of the aquadag from the rear of the tube. He said it just wiped off and he thought it was grime. Im in the UK right now so sourcing US products is problematic. I have...

Cabinet gutted today ready for filling and sanding. Found the original side art under the bolts...

Stripped the paint of the coin door today with its frame and sent it off for finishing. Fixed my torn speaker diaphram and re finished the power panel.

Thanks for the info. Im figuring out my own at the moment so see how that goes.

Interesting, I imagine production would use whatever stock was available at the time and it most likely changed, like the marquee light, now seen multiple types installed.

Pulled the harness today and cleaned all the wires and connectors. I removed the wiring to the RS transformer and reconnected the cut ends together. Im going to be installing a Dexter and its adapter can handle 230V so I dont need this any more. Found a series of amber retainers that were...

Done, thanks very much.