Search results for query: *

First of all, you did EXCELLENT work on those coin doors! The high score reset may be working as the screen blinks when I hit the button on the high score screen. The other buttons don't seem to do anything but then again, not sure what they suppose to do plus I'm not 100% the buttons work (I've...

I'm a little confused on where the white wire goes. Do I connect it to the blue wire on the middle black button and also to the green wire on the left red button?

nvm, I guess it's this one... https://www.arcadepartsandrepair.com/store/pinball-kits-parts/pinball-parts/williams-latching-switch-sw1023/

Great! To the sell the middle one as well that's not momentary?

I think there are two more wires to figure out. I'll post more soon.

Thanks!!!!

I'm thinking these may possibly be for the slam switch...not sure though!

Hey guys, getting close to wrapping up my Defender restore. Does anyone know how to wire the service buttons for the coin door? I "think" these buttons are used for multiple Williams games. I can only assume the existing connected wires are correct but I have no idea where these other wires go...

Will do! They have a pretty big footprint, what is the size of those pots?

Huge help - thanks again!!

Yes, worked perfectly! Thanks again.

I've been having issues with the audio on my Gorf. I've reflowed the solder on the header pins on the audio board and that seems to have fixed my issues. The volume pots are still a little erratic though. I believe they are 200 ohm pots and they are the same physical size as the pots on the...

Thank you so much, that was exactly what I needed!

That would be great!!!

I've got the PS rebuilt but need to test the voltages. Anyone know where the test points are on the board? Thansk!

Thanks, I did as well but didn't find anything concrete.

Anyone know if the A082-90421-B000 PS will work with Gorf? I think I initially picked this up for my Burger Time machine but ended up not needing it. Thanks!

Does anyone have any pics of the connectors on a Gorf power supply? I'm especially interested in the 12pin connector. Someone soldered wires directly to the pins instead of using a molex connector! I've looked at the manual and this is how I'm reading it...but would like another visual... 1 -...

I don't think I over-powered it but anything is possible. I did test the PS and I believe I'm getting roughly -4.7V coming out of it. Are there test points on the board where I can measure the -5V as well? I'll do some more testing and clean the edge connector also. Huge thanks for the tips!!!

I have replaced caps ordered.