Search results for query: *

Where can I source the correct stand-off posts for the display board? The plastic housing (with red cover) would push onto these posts.

Looking for some help with the monitor in my showcase cabinet. I don't know the exact chassis number but its a Sharp Image KTM-F2 34", gray board. My issue is blooming, focus, and image shake when the contrast is turned up. It's still playable, but looks so much better when the contrast is all...

Looking for a Tekken 1 pcb, clean with no corrosion. Shipped to 06082. Thanks!

I'm looking for a transformer for my SBC-1-A pcb. It should step down from 120VAC to about 18VAC and mine is putting out 60VAC for some reason. The numbers on the transformer are "205P67 1052 9012" for reference.

I picked up a 10' Model S with the SBC-1-A board. It currently does not work. The fan turns on and so does 1 LED on the board, but the displays don't work and can't start a game. I have no manual for this specific board, and I see no buttons on the board to enter a diagnostic mode. Can anyone...

I was wondering if anyone had used the CNC plans from classicarcadecabinets.com for Star Castle. I just picked up a project game that needs a new cabinet and before I go ahead, figured I'd see if anyone had used these specific plans before. Chris

This is a 34" monitor chassis from a showcase cabinet. The only label I can find is KTM-F2 34". I recently capped it with a Bob Roberts KTMF-2641M cap kit which had all the caps I needed, except for the B+ filter cap. B+ is around 133V by measuring on the diode mounted on the metal tabs near...

Looking for an original Robotron marquee shipped to 06082. Please send pictures and info to my cell @ 860-539-2552. Thanks!

Hi all, I have an idea that I think is doable, but like always, I'm pretty sure I'm overthinking it.. I have a Defender cabinet, all original hardware and harness. I'd like to put in a JROK board to play Defender, Joust and Robotron, but have 3 separate control panels to swap out. I assume all...

Looking for a working Wells Gardner monitor chassis and neck board for a Golden Tee 2005. Chassis number is WGM2792. Thanks!

Looking for a used cardboard backdrop for a Midway Space Invaders. Thanks!

Pentranic CH-288 The chassis fell off of the frame and shorted out on the tube (monitor was mounted upside down in the cabinet for some reason). This popped the fuse but also shorted out the k1507 transistor on the aluminum shroud (which is probably what popped the fuse). I replaced the k1507...

FIXED: It was the neck board socket. Must have been a bad connection to the focus pin. I have a G07 that takes about 30 min to fully warm up (brightness and focus). It has been this way for a while but I recently decided to try and fix it. Here's what I have ruled out so far, and why...

Looking for a pair of sitdown Sega Rally Championships in New England area. Willing to pay cash or trade my sit down Sega Super GTs. Chris

Hey all, I had my power supply, monitor chassis and Keltron box worked on a few years ago and everything has been fine until recently. When I turn the game on from cold, the brightness ramps up and stays where it should for about 10 minutes or so and then all of a sudden ramps up to where the...

Happy new year all! Purging a few things I'll likely never use. Text me with any questions! Set of (4) used Wico joysticks w/extra shaft. (shaft length 3.5") Grommets are all in good shape - SOLD Williams pinball System 11 PCB - some acid damage (see pics) - complete minus the two large chips...

Complete vertical collapse on a 19v1001 from a space invaders. The only things I have done are look for cold solder joints to which I found none, and swapped the chassis (PCB only) into my space zap which has the same monitor, and found the same issue so the vertical collapse is related directly...

My defender has been playing fine since I’ve owned it but will always blow the coin door light bulbs due to the following find.. I found that I get about 9.4VAC across the bulb socket terminals which is of course too much for a #47 bulb. I get about 5VAC out of the transformer which transfers...

Up for sale is my Ghosts 'n Goblins. As far as I can tell (feel free to correct me if I'm wrong), the game is all original besides the t-molding and lower corner protectors. Game is in very nice shape minus a few chips in the laminate at the rear of the machine and there was some swelling at the...

Last game I'm thinking of selling but I don't know how to price it so I'm just looking for some guidelines. As far as I know, this is all original Signs of swelling at the very bottom of cabinet at one point before I acquired it. Very nice condition for it's age otherwise. See attached pictures..