Search results for query: *

I acquired a AGE prospector crane machine. Looking for the manual or more info on where i can find trouble shooting help. What goes in that back portion? alternate dispense? i drilled out the lock, what is a good replacement? what’s the lock type called?

Thanks for your informative reply. I will keep digging and troubleshooting, and report back.

Thanks for your reply. The propane tank is empty and actually a prop, so it’s not sealed anymore. I’ve googled “Pachinko Palace Relay Board V3 assy 1000” and nothing claw machine related. Popped up. This is why I reached out for help on this board.

I was able to fix. The sensor bar was at fault. I replaced the mirrored like stickers that reflected back to the sensor indicating the positioning of the motor.

Hi, I picked up this non working claw machine, with no marks on it, I looked everywhere and didn’t see any logos or model numbers. Any help would be great. Thank you.

Nope. I had this game, and repaired the same issue. It starts with the sensor bar. There is a mirror like strip with black squares that the sensor requires to see and read to start and stop. If the mirror like squares are torn or too far away or close to read, it will act crazy. Also proper...

I have a eprom reader and writer let me know what to do and I can try to help u out.

I can’t get the motor forward or back and rotate to work properly. It either goes crazy and goes back and forth non stop or doesn’t move at all. The reflective decal on the side rail is worn, any one have a good picture of the bar with the size of the decal, maybe I can duplicate it with...

Can you share it anyways. Anything would help

I checked their website and it wasn’t available, I will try to contact them directly, thank you for the advice

Hi guys. I picked up Full court frenzy 2, and was looking for a manual. I’m trying to figure out the wiring diagram. Any help would be appreciated.

Sharing the backside of the coin mech, hope this helps.

Thank you for taking your time explaining things to me. The capacitor is indeed cracked on top. That might’ve been the root of other problems on the board. I don’t want to mess up my new board that working, but testing readings on the bench against the bad wouldn’t hurt. One thing I noticed...

I had ordered another board. This one is working. What can I do to test it against the bad board?

Capacitor wasn’t testing right, I kept moving it around and finally got a 8.23uF. I flipped it and tested the game. Same problem. I’m going to order a new one, should arrive this Sunday through Amazon Prime. Keen eye though, big props for scouting that one!

Better pics. Looks messed with. Not factory.

The board is missing a test button. What can I use to simulate or replace the button?

Having a hard time getting any reading. But they all seem to give this value: Brown and blue caps.

See pics attached for values. I tested them all and they all were the same.

IC chips swapped, same issue when testing. No change.