Search results for query: *

🙌🏼 I can’t believe that worked! Turns out my notch wire had a splice that wasn’t connected correctly, I re-spliced it and attached it and it is now functioning perfectly! Big Thank You!

Thanks for the advice, I will look into that and maybe even rewire just to make sure, yes there is a continuous setting, I will try that too. What do you use instead of tickets? Hopper? Or print out? At this point, since I can’t these ticket dispensers working, I might want to try those…

I’m so stumped! I hooked up another game; Fruit Bonus 2000. I play a game, press the “Ticket” button on the panel, and the ticket dispenser spots out some tickets, the meter counts them, then the machine locks up, error on screen: Sensor Jam. Same as Cherry master. Could it be the wiring?

I have 2 dispensers, different models. They both have the the tickets going through a sensor. They both have been cleaned and same error persist. The diagnostics, I am not sure about. How do you check that? Through the settings? Thank you for your reply.

Can I get some direction on this one guys? I’ve been messing with the settings and even installed a different ticket dispenser and same Sensor Jam display on the screen once the Ticket button is pressed. Then the system locks up and I have to reboot it.

I plugged in a Cherry master 96, and same error “sensor jam” when ticket dispenser button is pressed. The dispenser does dispense the right amount of tickets tho. But then locks up and a manual power off and on makes the system work again, but the credits are still there…

Hello I have a 8-liner cabinet. Not the first owner. This machine had a ticket dispenser “unattached”. I wired it back and when I press “Take” button, the machine dispenses tickets and then a “Sensor Jam” error is shown on the screen, I can’t press anything until it’s powered off and on again...

I’ve posted in several forums, looking for help. Not many people own or have worked in this model though. As far as the usual trouble shooting; .Follow tilt light wires to source. .Press cherry switch on door. .Press timer reset bar under hopper. .Trigger weight on hopper for payout. .Play many...

Thanks for the advance, looks like my hopper has a switch on the bottom on it. I’ve wedge it and closed the door and latched it, played several games and the tilt did not go away 🙁

Thank you for your reply. 1. I’ve added coins to the unit to see if it was stuck on a payout, and no movement from hopper. I haven’t heard any life from the hopper since I bought the unit. 2. I’ve read and heard about the “full” hopper theory. Although I’ve a lot a lot of coins, my goal this...

No I haven’t found a tilt switch. ive located a bent capacitor and a broken leaf from a switch, I’ve ordered parts, not sure if that what is causing tilt?

Hi, I am so happy to be part this wonderful website. I have been repairing Japanese pachislo slot machines for months now. I recently acquired a gorgeous Bally’s 1088-2 quarter slot machine. The unit is in great shape! The reels spins and all lights work. The problem with the unit is that it’s...