Search results for query: *

Original Space Duel cocktail cabinet. Complete and working. $1000 OBO Cabinet has typical bumps and bruises. Mild scratches on the glass. Located 07920. In garage, ground level.

Space Invaders original arcade by Taito. Trimline (smaller version, cabaret style). Clean, works, has power supply with adaptor from Arcadeshop in it. Typical bumps and bruises. Video to large for this post, PM me with email to see it working. $1500

...AR board, pcb board or both start buttons. Cab has typical bumps and bruises. Light scratches on the glass. Acquired in bulk deal years ago, and making space. *Edit-found box in storage with monitor and boards. Game is now complete will test in a few days, no extension cord with me, Pics to...

Looking for direction to repair a Fun E Ball (bouncy ball) machine. The spindle that moves the ball into the chute shakes but does not turn. Not much in manual or on a internet search. Pics show the spindle that should turn, where the balls need to be pushed in the chute and another pic shows...

What is the proper joystick for Golden Axe and for Double Dragon? Wico? leaf verse micro? color? Thanks!

In need of a set of Battlezone handles. LMK if any are around. Thanks!

I have a C551 cap in the kit that has no cap on the chassis. There is a space on the chassis on a very small side board. Do I put it in as an upgrade?

Need a remote to converge the projector. Any suggestions?

So my Spy Hunter works fine but every few days I have to calibrate the steering. I have an arcadeshop switcher and adaptor. I assume the battery on the adaptor is the problem. I bought a NVRAM from weebley but before I install it, do i need to remove the battery from arcadeshops adaptor? If I...

Woke up to a dead Kortek monitor: KT-2001SF I did a recap kit and power cap and a HOT which measured bad in my opinion. Worked for 3 days and then graphical issue as seen in the attached pic. It is the chassis since I tried another pcb and a TPG and same picture ocurred. Any help or who can fix it?

WTB: I am looking to buy a Timber, Tapper, Discs of Tron, Demolition Derby, or Midway NFL Football PCB. The board does not need to be working. Please send pics. I need the boards for my Timber and Tapper I am building.

please delete, duplicate.

So I put a switcher in my Defender. It works most of the time. Sometimes it come up in the settings menu and I have to reset it to free play. I heard you can put a cap in the 5 volt line to stop the switcher from shutting too fast and not allowing the cpu to record memory. Anyone know the solution?

Mine transformer went dead from my Donkey Kong. Model - PT821B Any leads, lmk. Thanks.

What joystick assemblies are needed for a Timber I am building. Also, which assembly is used for a Tapper and link to purchase. Thanks! David Morristown Game Vault

Who sells these? Thanks

Anyone know who sells a Robotron speaker?

I can not jump and kick in mid air. Do I have the wrong actuator?

Can someone confirm the size for a mini/cabaret Centipede? I beleive it is a 2.25 inch on Arcadeshop http://www.arcadeshop.com/i/19/2-trackball-unit-white-ball-atari-happ.htm Mike's Arcade https://mikesarcade.com/cgi-bin/store.pl?sku=TBALL214 Either of these correct?

This broke off. Cant find it anywhere.