Search results for query: *

Checking if C18 and C19 has to be 3300uf on AR-02 and 4700uf on AR-03?

What is the proper joystick for Golden Axe and for Double Dragon? Wico? leaf verse micro? color? Thanks!

So my Spy Hunter works fine but every few days I have to calibrate the steering. I have an arcadeshop switcher and adaptor. I assume the battery on the adaptor is the problem. I bought a NVRAM from weebley but before I install it, do i need to remove the battery from arcadeshops adaptor? If I...

Batteries ok. Defender does not like swictcher. Drains 5 volts to fast or something like that and comos memory not captured.

So I put a switcher in my Defender. It works most of the time. Sometimes it come up in the settings menu and I have to reset it to free play. I heard you can put a cap in the 5 volt line to stop the switcher from shutting too fast and not allowing the cpu to record memory. Anyone know the solution?

Yes! I had wrong title in my head. Edit done. Thanks!

I can not jump and kick in mid air. Do I have the wrong actuator?

Can someone confirm the size for a mini/cabaret Centipede? I beleive it is a 2.25 inch on Arcadeshop http://www.arcadeshop.com/i/19/2-trackball-unit-white-ball-atari-happ.htm Mike's Arcade https://mikesarcade.com/cgi-bin/store.pl?sku=TBALL214 Either of these correct?

battery Changed to a different battery and it worked.

battery I changed the battery and it still wont hold free play or volume. ?????

This broke off. Cant find it anywhere.

A lot of adds do not show the amps. Also many don't have -5volts Vector labs indicated -12volts should be @800ma or better..... And I believe I don't need the -5 volts on the power supply since it is produced on the Vector Labs power adaptor via the -12v line?...

Of the 100's of ATX power supplies out there, which one will do the job for mating it with the Vector Labs Sega G80 Power Replacement board?

It occasionally loses free play setting. Any thoughts?

What value cap please?

Both monitors should have identical graphics.

repair Any direction?

Anyone fix Ridge Racer 2 pcb?

Bolt comes out. Spins in place. Threads stripped. May need to tap new threads.

Have a handle that only mounts to shaft on one side and there is a wrong screw in it. Stripped. Why did they not make it with a bolt on both sides? Any thought how to fix or replace?