Search results for query: *

Doh! Interested in 1 if you don’t want both.

Buddy of mine has been waiting for his Jr. Pac art work from TOG for two years. So I'll be watching this thread with interest for him…

With some assistance from @joemagiera it appears I'm actually after a ceramic MOSTEK 4015j, see pic.

Thanks for the new address. Email sent.

PM me, my email bounced.

Turned out to be horizontal hold pot that was bad. Back up and running

Looking for a ceramic 4027 ram. Would like all the ram to match in my Carnival

Yes we did, he needs one to copy from.

Looking for a complete Sinistar upright harness.

A friend of mine dropped off a 20ez to be fixed with the symptoms of being dead after recapping. For the life of me, I cannot get this thing out of HV shutdown. I’ve swapped in a known good hot, IC601, IC401, Q901, known good fly back and still nothing. I recapped it with a new kit from Arcade...

Banging my head against the wall on a Bosconian repair. Boy would one of these be helpful. Fingers crossed testing is going well…

And we’re done! Pieced together a vertical K4900 setup from a bunch of parts. Found a second chassis that worked better with the donor yoke. So happy to have this in the lineup!

i was able to find the heater outputs off the board. 0.9v. In looking at the diagrams this appears to be an output off the flyback, through a single resistor (good) to the heater output. So we're going to say this one is junk, and time to pop in another vertical monitor.

:dunno: That guy’s an idiot….lol

Can anyone tell me the brand of monitor/chassis this is? Came in my Carnival. I have high voltage, but no neck glow. Don’t want to troubleshoot this blind without schematics. I tube swapped it as all the guns were dead in the other tube.

Got the board working. Wow are the sockets on this board shit. One bad ram. Capped the sound board and amazingly it works too! Can anyone tell me the brand of monitor/chassis this is? I have high voltage, but no neck glow.

+3 for Shippsy. And @Lumo they have a pickup outlet in Calgary. I don’t ship anything direct any more from the US.

Time to get down to business. Bad 3055 on the power supply thus far. 5v is now back…

Coin door done and installed. Next update will be a while from now as we will get started on the boards in November…hopefully.