Search results for query: *

  1. jjhudgins

    24K7400 limited use?

    They also come in some of the Chicago gaming, multicades
  2. jjhudgins

    Hantarex MTC 900/E Low B+ Voltage & Dim

    tr6 fixed it tfk 527 bf871
  3. jjhudgins

    Lucked into home use only k7000 chassis and tube got a few questions

    The monitor ground is not the same as an earth ground for a k 7000. One ground goes to the braided wire that’s around the tube and the other one is grounded to the chassis frame. Both grounds should lead back to the neck board.
  4. jjhudgins

    Lucked into home use only k7000 chassis and tube got a few questions

    Post a pic to make sure you do have a k7000. Everything between the k7000a and a regular 7000 should hook up the same way
  5. jjhudgins

    Lucked into home use only k7000 chassis and tube got a few questions

    The yoke connector if it's all in one piece (not split in half) only fits one way just like the k7000a The blue white wires only connect one way too. One goes from the chassis to the neck. And one pair goes to the chassis from the neck. They might be zip tied together if you can't tell. Just...
  6. jjhudgins

    Hantarex MTC 900/E Low B+ Voltage & Dim

    Pulled one of the shelf with the same issue here. @Ohmerone
  7. jjhudgins

    24K7400 limited use?

    You're misinformed and seem to believe everything you hear. I've sold thousands of quality rebuilt chassis and have always handled any issues quickly and responsibly. Occasionally, a HOT may fail after some time, or a buyer may plug a chassis into a non-isolation transformer cabinet — and I...
  8. jjhudgins

    24K7400 limited use?

    I have plenty of the k7400 25"
  9. jjhudgins

    G07 has high voltage but no raster or screen display??

    Old thread but it helped me today. Pin 5 of the fb had a small break in the pad. Thx
  10. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    True but a full cap kit for this including audio and filter caps are 44.25 from Peter. But I also wanted to know what specific caps were responsible for this symptom.
  11. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    No. But it was 4 caps in the horizontal section. I never throw parts at anything unless I know that's the issue or it's obvious from the visual inspection. Since this was working and I’ve never seen this issue on any chassis before I tested each cap with a esr meter. Found 3 completely out of...
  12. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    Wow. I was just trying to share just in case there’s a fix for this then It’s documented. I’m pretty sure this is horizontal wrap and moving the horizontal centering pot really doesn’t move it. at least not to correct it. So I am in the process of checking that circuit. I just don’t recall...
  13. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    When I get a chance I will check out the Horizontal position circuit
  14. jjhudgins

    This k7000 stole my Sunday morning

    I was going to suggest that. Then I read the entire post.
  15. jjhudgins

    Sharp XM-1801/XM-2001 Flybacks

    Will they ever be reproduced again?
  16. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    Yes. Did the same thing on the Playchoice
  17. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    I would try a FB but they are sold out.
  18. jjhudgins

    Sharp XM-2001 Odd Behavior (Fixed. Bad caps in horizontal circuit)

    Just strange Haven't Dove into yet
Back
Top Bottom