Search results for query: *

I did change the filter cap and yeah I did use a little thermal paste behind it but it was non-conductive

So I've been working on it 14 inch Sanyo which is very similar to its 20 inch big brother. I got it and it didn't work so what I've done to it so far has been changing q901, changed IC601, changed all the capacitors, HOT, B+, and I checked a couple of the resistors while in the process. It was...

Sencore 143 like I said I have the originals, ai even sent some over to somebody at one time but it would be nice to have the e-files because my original ones are very very old and brittle

Yeah I can't access it either. My phone and computer don't like the website. I have a sencore TV rejuvenator I wouldn't mind accessing the website so I don't have to drag out the Magna Carta that is the manual

Cool thank you I think I'm just going to order another one. Yeah the p1000 is what I had maybe it's bad I don't know or maybe I got mixed up

Working on a 14-in Sanyo monitor I went ahead and replaced the B+ a while back and I've been having trouble trying to adjust it and then I thought maybe it's not the same as the 20 or 18 inch model. I was wondering if someone could confirm or test their B+ . I have one in and I got it from Peter...

You have been trying one thing at a time here I'm going to have to replace that IC again with the old one see what happens if anything. It's not on a socket it goes directly into the board. That's all I can do is just go back over my work again before I make another step.

Yeah I got my stuff from Peter and OES I forgot I did the HOT as well. Which is partially why I'm thoroughly confused now

Let me say I did the basics first. I replaced the B+ potentiometer, HOT, I also recapped it while I was at it, and found two bad capacitors I also replaced the 601 IC in charge of the high voltage. Before I replace it I was getting about 131 volts. Now that I've replaced it I'm getting anywhere...

When are the grounding wires even though it was connected wasn't actually making contact with anything to ground which was setting this off. Funny enough or sad enough it was a simple thing. But I knew it would be something stupid and simple

Yeah I'll go back and test the ground here but everything looks as it should and looks square. I just can't think of what the heck is going on here or maybe it's a combination of things I don't know. It's always good to go back to the basics and check everything but I've been doing that. Just...

Yes it used to have a MTC 9110. But I thought I put the pins in the new molex connector properly. Maybe I didn't I want to have to quadruple check it again. Like I say I'm out of ideas. If it's just a simple pin misplacement I'll be the happiest camper on the planet! :-)

So, I'm relatively new to the Polo world. I was part of the MTC 9110 crowd, and I loved that chassis. Anyway, I have a newly rebuilt Polo 25-in. All the basics have been done: caps, FB, solder, etc. The sync is good, and I can adjust all the colors, contrast, brightness, etc., but some colors...

@security0001 Just got my flyback orders from an alternate timeline. Might be wishful thinking on my part, but I would love to get some KGR 1901 flybacks in this timeline me and the handful of people who are probably still holding on to those chassis 😄

So I have read that for F100 & F101 to replace the 5ASB with 6.25A SB. I have some 6A. Should that be good enough? I am trying to use up my stock pile of fuses but will get 6.25 if I must. Thanks 😎

Yeah That's what I was kind of worried about I don't want to blow anything but the only color vector game that I have is Star Wars and it doesn't really work very well. I had the boardset rebuilt. Again it just means I have to keep on trucking. I'll be off to the high voltage next and then I'll...

So I have a 6100 board that I have cleaned and replaced a few pieces. I'm just going to reflow the solder everywhere but it looks good. I don't have a machine to really test it with. I'm wondering if it would be safe to test on somebody else's machine? I've done it with other monitors including...

I bought one of the first Fred kits to come out I was excited about it. I held on to it for a hot minute when I finally put it together and did everything I couldn't get it to work right. It's sort of brought up part of the picture. I told him about it and he said he had something that would...

Thinking about picking up some bw tubes without chassis, how can I identify the chassis that would go with them? I'm assuming some have frames so I can see what may or may not be mounted to the side. Probably won't have a lot of time to look but I just want to figure out ways I can maybe quickly...

Thank you I don't know how I missed that look forward for other spots needing upgrades because I want to give this thing as much as I can