Search results for query: *

Is it a K4600 per chance?

Did the OP get them, or did someone else swoop in and snake them?

Looks awesome, but do yourself a favor and get the smoked plexi installed over the monitor

Contact @darinjacobs

Boom!

To get better visibility to people scanning through this forum, I'd recommend changing the title to "Galaxian Cocktail Control Panels" Also, send a message to @Todd Tuckey as he has a warehouse of shit that he's always unloading and he might have what you need

Super score, @ToddK. That really is a museum piece. I'd buy that in a heartbeat, but unfortunately cocktail games were not made for tall people. What would have been super cool, is if they made a cockpit version of Tempest. Much better candidate than Missile Command, IMHO

Earthshaker 24,769,480 36,838,270 Will be traveling quite a bit for the next few months. May be a while before I can jump back in here. Have a great Thanksgiving everyone.

Have you messaged @madrits ? He is our in house Pac-Man guru

Yes Coin #1 is orange with black stripe and Coin #2 is green with black stripe

Price drop bump

Sub Evaporust with Simple Green, Purple Power or Krud Kutter

How about filling a bag with evaporust and tossing the evaporust and switch filled bag into an ultrasonic. Wouldn't have to waste the reusable evaporust or clean the ultrasonic

I have a Beryl Green '63 ragtop Welcome to the group. You most likely have an Electrohome GO7 monitor. Post photos of the monitor and what it is doing or not doing and we can help confirm what you have and the next course of action

Okay. I'd leave that ground braid off the monitor frame and get the power supply all buttoned up. Here is how to do it properly http://www.therealbobroberts.net/acwiring.html http://www.therealbobroberts.net/basic-ac.gif

That is FUGGGLY. Some people should never be allowed to own these games. Well, there are too many questions, but the pinout for the edge connector is in the manual and you're gonna want some .156 split terminal pins and a good crimper. And if you search around for the "mod", which you inherited...

Is the power coming in to the cabinet going straight to the transformer? No line filter or fuse? Do you have continuity from the ground braid to the ground plug on your power cord?

Hopefully you only blew the fuse

Pull the fuse on the chassis and test it. I don't know how your game is frankenwired, but I bet you blew the fuse with that braided ground wire. Is the power at least coming off an isolation transformer? Might not be.

Here is the manual https://www.arcade-museum.com/manuals-pinball/T/Taxi_OPS.pdf If the switch is broken and you just need the switch and not the actuator (arm), then it is available here https://www.pinballlife.com/williamsbally-sub-microswitch-5647-12693.html You will need a diode with any...