Search results for query: *

...I can swap the eproms and configure for whichever game you like -- just pick ONE from the following list: GV-101 Argus GV-102 Mad Planets GV-103 Q*bert GV-103 Q*bert Mello Yello GV-103 Faster, Harder, More Challenging Q*bert GV-105 Krull GV-106 Insector GV-110 Wiz Warz GV-112 Knightmare...

Wound up refreshing my inventory and made more of these adapters -- seems like most people use them on their JAMMA test bench setups, but they were also designed to be used inside arcade cabinets. Reminder -- these allow the use of Super Nintendo or Sega Genesis controllers with any standard...

I've had a few people asking for these again, so I assembled a new batch this week. This is my custom design from a few years ago to allow for both Joysticks and Light gun to be connected at all times in a Vs. machine. Arcade gun harness can be used in both Vs. Unisystem and Vs. DualSystem...

...such as PVMs, etc. However, I built in a standard video output header section just in case you want to use a normal arcade monitor, etc. Also, for Q*Bert specifically, there's an LED that will blink to show the Knocker functioning -- but if you want to hook up an original knocker coil, then...

Restored Nintendo Vs Playchoice Light Gun Here is your chance to add a fully functional and refurbished Orange Nintendo light gun to your collection. This gun has been completely disassembled, thoroughly cleaned and restored. Light sensor PCB has been re-capped, all solder joints repaired, all...

...had some time to build up a batch of all brand new replica Gottlieb service panels. Plug and Play with most of the Gottlieb Video Games like Q*Bert, Reactor, etc. The panel is 3D printed, but designed in the same exact style and design as the original. Complete with working brand new...

...as PVMs, etc. However, I built in a standard video output header section just in case you want to use a normal arcade monitor, etc. Also, for Q*Bert specifically, there's an LED that will blink to show the Knocker functioning -- but if you want to hook up an original knocker coil, then...

I've been told by a few newer members how they can't see this in the New Parts section, so here's a re-cap: Nintendo Vs UniSystem (Single Monitor) adapter to use both sides of the main PCB. Populate both sides of your PCB, attach this adapter and you're all set! Swap between the two games...

I've been making these for the last 5 years or so, but I usually just make them to order (general build time is about 2 weeks depending on other current projects). Last week I was able to make up a few extra sets of these so if you want one now with no waiting, here is your chance. Full PO/SPO...

Authentic PC-10 original prototype/test cartridge. Fully functioning and unmodified. Add it to your Play choice collection today! All original cart, complete with handwritten and dated EPROM labels. Labels are dated 1/30/92. Cartridge titles as "NEW GAME 2" on the main menu -- just as other...

Reactor Replica Wiring Harness Set (Gottlieb). I made a couple extra low voltage Reactor wiring harness sets last week. Two sets remain as of right now. These have the correctly keyed 12 pin obsolete connector for the sound board and one of my custom 60 pin nylon edge connectors. These sets...

...and working brand new board with brand new parts ready to go for sale now. It's currently configured as "Faster, Harder, More Challenging Q*Bert", but I can swap the eproms and configure for whichever game you like -- just pick ONE from the following list: GV-101 Argus GV-102 Mad Planets...

Figured I would make a post here (since not everyone looks at the New Products section!)...I just completed a 1:1 replica of the original Gottlieb main board (it just has a few little tweaks as improvements, enhancements) and have the blanks offered in that section. Check out pics and full...

NEW Q*Bert, Reactor, Mad Planets Gottlieb Sound Boards Replica Sound Boards for Q*Bert, Reactor, Mad Planets, Krull, Qbert's Qubes, etc. I recently realized that I never made a sales thread for these replicas that I finished up late last year. Various Gottlieb collectors have already been...

...of these adapters today, so I have a few available and ready to ship now. These adapters are designed to work with the stock Playchoice and Vs** (Unisystem and Dualsystem machines). Just plug the gun connectors into your arcade machine’s existing wiring and plug a working NES zapper into...

Perfect for the Gottlieb collector who has everything! -- Replica Power Supplies for Q*Bert, Reactor, and Mad Planets Well, after rebuilding dozens and dozens of the originals, I got tired of the scorched pcb's, burned traces, previous hacks, etc. I've made a limited batch of all brand new...

INTEREST CHECK: Williams Harness Reproductions - Joust, Robotron, Bubbles, Sinistar I've made some Williams reproduction harnesses in the past, but lately I've had a bunch of requests to make more. I have all of them mapped out and ready to reproduce, but I would prefer to make them exact...

Looking to buy a known working Golden Tee Fore Complete 2005 Red PCB. No need for the hard drive or video card, but I’ll take what I can get. PCB should look like the one in this pic. Thanks in advance. Please PM with what you have available.

Looking to buy an original Us vs. Them laserdisc from Mylstar/Gottlieb. Willing to buy a full original conversion kit if available with original roms, artwork, etc. Let me know if you can help! Thanks.

Q*Bert Replica Wiring Harness Set (Upright using Filter Board Version) I made a small batch of complete low voltage QBert wiring harness sets last week. Two sets remain. These are designed to work with the upright Filter Board setups. These all have the correctly keyed 12 pin obsolete...