Search results for query: *

Hi, how do I go about purchasing a slice? I would like to add on a 24 pin and 28 pin setup. I am from Chicago IL and run a small arcade and repair business. The Slice would definitely help me in troubleshooting chip issues. Thanks, and hope to hear from you soon. Scott

Hi, I see you have a DL 2 for sale. What are you asking for it? Thanks, Scott

Thank you, it was the BIOS setting" Power On After AC Fail".

Thank you, it was the BIOS setting" Power On After AC Fail".

Thank you, it was the BIOS setting" Power On After AC Fail".

Mikes Arcade has a really good plug and play power supply that will connect to the original harness. I am using one in my Galaga until I rebuild the power boards. https://www.mikesarcade.com/cgi-bin/store.pl?sku=PSK-MIDWAY1

Hi all, I have a quick question about a startup issue on a Sea Wolf Next Generation arcade. I had to replace the CMOS battery because the battery was dead. Once I switched out the battery and I turned on the machine, I had to short the PWR SW on the mother board to get the game to start as...

I have a Mat Mani in a Taito cabinet. Everything works fine except it wont coin up when coins are inserted into the machine. I have checked all the wiring on the coin door and on the wiring harness and everything sees to be ok. I checked all coin micro switches and the are working and I have...

Looks like your 1st answer was correct, it was the wiring. I changed the wiring position and it works perfect. Thanks for the help, much appreciated!

Thanks for the info. I confirmed the pin layout is correct and even sourced out another working SSL board; however I am still getting the same results. As soon as you start the machine, the vibration motor turns on and you get constant vibration. I would assume I need to trace the lines bock to...

Hi all, Have a question about a super hang-on vibration motor. The good news is mine works fine, the bad news is that it is constantly on as soon as you turn on the machine. I picked up this machine a few weeks back and i noticed the motor JST connector ( i believe that is what it is called)...

Thanks bobbyb, I am going to double check wiring and check your recommendations, I will let you know how it turns out!

Hi, new to the forum and excited to be here! The problem am having is with a 25inch med. res monitor I put in my cruis'n wold . The monitor dose work, however, for some reason when I connect the monitor to the game and I turn it on, I blow the wall GFI. The good news is that I have isolated...