Search results for query: *

Watched @ArcadeJason yoke wind. Using a NOS tube. This has different posts than Jasons video. What posts do I wind the left and the right coils to? Original was using all 3?

Im going to be hooking up my mistercade Jamma to k7000 video input. Question is to sync do I have to add a jumper wire to the 2 sync inputs or only the single +H sync like the picture attached? A little confused as there is only a white wire for syncing coming from the Jamma harness. Thanks!

Replacing a flyback on my Sanyo monitor, instructions say to disconnect wire (attached). To be on the cautious side, can someone tell me if this pulls off, is soldered? I dont want to bust anything as Ive never disconnected on of these, thanks!

Is this the Sanyo ez20? Im needing a cap kit and I just got this thing. Want to be sure I get the right kit, thanks!

I simply refuse to use LCD's. I bought a couple machines with LCD's and want them out. I live out in the middle of nowhere USA and dont have anyone local to fix this stuff. Learning myself is the only option and this newbie has already managed to do tube swaps without having to post questions. I...

Yes, the tube was tested on its original chassis and spliced into the K7000. I attached better wiring images. When I initially hooked this up the red and blue were swapped and the Yellow and brown were swapped. Polarity checked out and the ohms reading is 3.9 on the red and blue and 14 on the...

Looks like that but doesnt have the 2 prong connector and voltage reading are on the wand.

No, it doesnt plug into multimeter.

I do for discharging.

Is it possible the flyback is bad? It is new according to the person I purchased from? Anyway to know outside of swapping it?

Thanks for your help, I checked wires, yes I have the R,B swapped to B,R and Y,G are swapped G,Y but not crossed. I dont think there is a wiring issue. Tested many parts and they check out. I watched a couple of Mikes videos. I un-swapped the cables just to check and I still get no power to TV...

Edit - Wires are fine. Checked all power related areas and they check out. Flip the power, nothing, and then the faint smell of burning. I dont see anything smoking except for once when it appeared to come from the neck board but IM not sure. I didnt see any burned or charred areas. Checked...

I have an original space invaders that I swapped the dead B&W with color TV that has an RCA. Works great, problem is the game width is too large and I cant get the game to squeeze in due to lack of pots. Going to use a K4600 chassis that I have. Question, is the hookup as simple as twisting the...

Ive personally tried many of these before I gave up because I always ran into some issue. They did work but I found colors to be off, delay etc. so I just found the right donor tubes and wired it up directly. Someone else may have better insight but I was never impressed with the converters.

Wow, thanks for the links! Going to get a few. Thanks everyone for your help!

Cant find one on digikey? Would this one work R701? Looks like the right one according to your specs. Thanks!

The smoking part is the white block (what is that called) where the blue and red wires run into. Filter cap checks out. All caps check out and weren't installed backwards after reinspection. Last week before I reflowed everything and added a few parts the fuse blew but isnt now so maybe minor...

Here is how I bridged the negative and soldiered the two pin filter cap in the original 3 leg area. Am I missing something?

I bought a k4600 untested. I recapped everything, reflowed double checked everything powered up and nothing. After about 5 seconds I saw some smoke and when looking even felt heat. After looking over everything, this piece (attached) seems to have very much overheated. Is it possible this is...