Search results for query: *

Testing a g07 after a retube before it goes in the Bubbles cabinet. I found a heat sink and transistors on eBay so I will need to wait for that to arrive. Also I need to pin heavier gauge wire for that transformer header. I only had 20awg which I think is going to be way too light.

New power cable to the transformer block and a 15 pin header. I’ll need to use my Robotron block as a guide for the wiring on the output side. I also need to find a transistor heatsink to finish up all the power components.

Some good progress today. Happy with the way it’s going despite some of the bumps.

Coin door all cleaned up.

Now I have to deal with my power brick that i picked up cheap on eBay. The harness has been hacked off the top of the transformer and the power cord is missing. Looks like I have some repair work to do to this one.

Now I can put the boards in and start threading the new harness. The orientation of the sound board is rotated but it's not causing any issues that I can see Next hurdle is the power board. That didn't come with the set but I did have a spare, unfortunately it's not going to mount directly...

Now the wiring harness has arrived I can move this along a bit more. First hurdle is the mounting plate that my Bubbles board set came on. It was attached to a single Defender mounting plate which is of course not going to fit as is, so I had to chop it. The dimensions are a little larger...

5 posts up from this one, hit up @hisnice

I found a nice HS-1 locally, great condition and perfect for this project. I'll be pulling all of the POW stuff off the machine including the full cut-corner CP. It's all in nice shape so if anyone wants to buy it just hit me up.

Figured the little bugs out. Everything up and running. Volume was a bad speaker Game was actually fine in free play mode for 4 people. I got my wires backwards on two of the volcano buttons, so an easy fix. Only thing left now is one dead bulb in one of the volcano buttons and making a...

Real close now just chasing down a few bits. - No volume, no doubt the arII may need service. - Game seems to be set to two player even though it’s displaying in proper cocktail mode.

It’s been a few months wait but the harnesses for both Warlords and Bubbles made their trip from Canada and are here. With a little luck I will finally be able to finish this up over the weekend.

I’ve had a few NeoGeo pieces from Joe and they were decent, just had to wait two months or so and then email to chase the order. I’ve also had a couple of sets of side art from him and the quality seemed perfectly good enough.

Agreed that the quality just isn't there with most of these vendors, they seem to just go for the cheapest materials they can find regardless of the quality of the final product, not to mention they have jacked most of the artwork without permission (ask me how I know). The best repro art I...

No pre-cut either which is going to make cutting the flanged joystick hole extra fun

Some extra goodies that Andy sent with the cab. A NOS CPO for my Ikari Warriors build and a duramold CPO for Bubbles from I think @ThisOldGame who used the original Williams films that Andy provided to create the repros.

That would be great. Looks like I’m going to need the door and power plate.

Interesting situation with the board set that I picked up. It was very well packaged and protected for shipping, however it’s all mounted to a single metal plate which is not the usual Williams layout that I’ve seen before. Unfortunately my cab doesn’t have the plates either so I’m going to...

Decided to do a little work on the Bubbles restore tonight as a break from working on the arcade ceiling. Got the CP populated.

As the machine was technically fully working I threw it in the lineup for my daughters party tomorrow. Robotron got so offended that it glitched out completely. :ROFLMAO: