Search results for query: *

What a shit show, can’t you buy a rebuilt Ms. on the bay for $150 shipped? And is the cab all original or running a switcher? If a switcher is in there I’m pretty sure you need to lift a fuse for 12v. And don’t we usually 1 service the edge connector 2 clean the pins of all socketed chips with...

I can confirm it works 👍🏻 Shifter, everything works great.

Anyone running a Cruis’n USA with the Williams steering feedback board?

Does anyone have an Off Road challenge that they have direct swapped Cruis'n USA or world into by just changing the game board? I have an ORC and it has a Williams 2 cap feedback board, I've noticed C-USA uses a 4 cap Nintendo feedback board. I've read you can swap in C-USA or C-World into an...

Curious to see what works, I had a Galaga that only hummed when it was closed, I rotated the PCB 180 to get the sound section further from the monitor and WALA no more hum.

I’d message Todd anyway, he might have more.

For anyone else looking to get an uncommon repair…. @gamefixer is the one you seek. He repaired my R-Type, something many other skilled individuals bowed out of.

@BigTuna101 By the time you pay for shipping and repairs, you might as well go with this https://forums.arcade-museum.com/threads/namco-class-of-81-arcade-agame-pcb-licensed-jamma-tnt-amusements.552950/

It boots to a garbage screen.

@ArcadeCited The contacts assembly just snaps straight into the back of the buttons.It does require a little more force than you would expect. The safest bet is to uninstall a button so you have it in you hand, do the same with the contact assembly and it will be easier to see how they snap...

Good point @HudsonArcade thanks. I’ll put one in and see how the machine responds. I’m going to put a heat sink on whichever ends up in there.

I’ll get a heat sink on the way and hopefully that will do the trick, probably a spare NTE990 while I’m at it.

I think you’re right @andrewb that area on my board is suspicious, and yes in fact the sound returns even after a few minutes of not playing. I’ll look into a heat sink of some kind, I was thinking about a small PC type of fan also.

Well damn, it’s been running great but this evening the sound started to cut out completely. I was touching a few spots on the board and the NTE990 is wicked HOT.

Do you think that spring would work for the seat release lever on an Off Road Challenge? It looks right.

I wouldn't mind, there are a few of you guys that are always generous with their time, I think that is a key factor in keeping this hobby alive.

Replacing the NTE990 has solved my final sound issue of overall low volume. I just played a few games and dialed in the individual sounds. Nice to have this machine 100%, minus the hard to find coin chute. Thanks to all 👍🏻🤙🏻

Yup there it is on page 1 thanks @andrewb , I already have NTE990 that should be here in a few days so it will be the next step. I’m glad you guys are doubting the PS being the issue, I recapped it because I wanted to keep the machine original.

So on my board OP2 is not there, instead there is an NTE990..? I don’t know what that’s about.I have one of those on the way along with some tantalum caps for the 3900’s.

Some Tantalum caps are on the way.