Search results for query: *

Here is a video detailing the issue. At the start of the race, I tap the pedal. The car auto accelerates. I go to the analog menu and toggle the reverse. You can see the car immediately stops auto acceleration. I save the analog configuration and reboot. The entire processes starts...

It looks to be rotating 180 deg.

I have a PiPosition (early batch version? with raspberry pi soldered to PCB). Just got around to testing it. Upon boot, a coin is inserted and the game begins normally. The car does not move until the accelerator is touched. Once the accelerator is touched the car starts to accelerate but...

Please add me to the list for one. Thanks!

Mystery SOLVED! My new SpinTrak was wired incorrectly. Per the Ultimarcwebsite (http://www.ultimarc.com/SpinTrak.htm) Brown +5Volts Yellow X1 Green X2 White GND From the image, the wire order on the SpinTrak connector is Brown-Green-White-Yellow-Open. My SpinTrak was wired...

In an act of desperation, I hooked up just the X direction of my Happ trackball to the spinner connector (and power source). Rotating left/right results in an increase/decrease value. So, it appears to be working with the trackball. I am baffled.....

My apologies, I'm not exactly sure how to answer your questions (but I will try). :-) I do not have a logic probe to check the outputs from the encoder. Also, I have not modded the encoder board to get TTL low/high or active high. All I have done is wire the SpinTrak to the Mylstar board and...

Yup...tried it for both trackball X and Y. The values only increase. If it is a board issue, anything I can do to fix it? Thanks for the help!

I swapped out my new SpinTrak with an older one that was installed in a different game. Unfortunately, no change. Spinning left or right only results in a clockwise spin in the game or increased values in the test menu. I'm sure that I am missing something obvious.... Any ideas, please let...

OK. I finally got around to hooking up my SpinTrak to the JROK Mylstar board. Unfortunately, I have a problem with the spinner. If I spin right in the test menu, the values increase. If I spin left, the values increase (opposed to decrease). If I go into the game, spinning right or left...

one more pic of the solder side.

Here is what my board looks like. Any ideas? THANKS for all your help. I am learning a lot. :-)

Great info! Thank you very much. :-)

I bought my Slikstik Tornado spinner from Suzo Happ and it came with the USB/PS2 PCB. I'm not sure this will work with the Mylstar board. If it will, please let me know how. Thanks!

Thanks for the reply. I was hoping to use my slikstik tornado spinner....no luck yet. I ordered the SpinTrak knowing it will work.

I read through many of the KLOV posts but was unable to find a definitive answer. What (if any) of the modern day spinners are compatible with the Mylstar board. Specifically, can a SpinTrak, Slikstik Tornado, etc. be used??? Thanks for any help. ;-)

One more question. Anyone have a best guess for price (assuming excellent condition)? Thanks again. ;-)

Great feedback! Thanks to all that replied. :-)

Bump. ;-)

I have a friend looking to buy a TEAM PLAY with Centipede/Millipede/Missile Command/Let's Go Bowling. Honestly, I don't know much about this machine. Can anyone comment? Is it emulation? If so, does it play well. Not sure my friend would know the difference either way. :-) Thanks for any...