Search results for query: *

I don't know 100% that this is the problem. However, after doing a full cap kit, it has the exact same symptoms it did when I started. I can only find one other reference online to the .8 amp fuse blowing on this type of monitor, and the reference found was to this particular part being...

It is not anywhere on his site that I can find.

Okay, forgive me for asking a dumb question. I'm used to working with Pinball where you can get pretty much any part you need. This part LH13P04A (WLH 28 A) seems to be unobtainable. I have a monitor that is dead without this part ( LCD replacement already in the game). Am I supposed to just be...

Sega 200 -5044

Cleaned it up a little. I believe this is the source of my problems.

That fixed it instantly. Thank you!!!

What is this part called? Photo of broken part and label in manual. Cant find what this actually is or how to order it. This is from a Hang On monitor and it is causing the .8 amp fuse to blow. Thank you! This is part l503 in the manual. LH13P04A (WLH 28 A) And before you ask I already...

Im in the same boat with a hang on monitor except mine is toasted. If anyone has an answer on this please let me know.

Picked up my first Jamma shooter, a Konami Lethal enforcers with a 4 way Jamma Splitter, with one of the games being police trainer. All games work flawlessly, except Police Trainer seems to have some sounds swapped. So the hit sound is the miss sound, there are people constantly screaming in...

All, I just picked up a Hang On running off of a SMART-PI board. Amazing product that works exactly as described I recommend. I cannot figure out how you change the dip switch settings using the SMARTY-PI though. I can navigate to them in the test menu and it will show me what the settings...

I move pinball machines all the time, and 2x per year in a U-Haul trailer. Tips- Shrink wrap your games with pallet wrap if you can. Tie down straps are your friend. If stacking side by side, go to the dollar store and get $10 worth of swim pool noodles, they make excellent padding between...

Its a blast. Only brought one game for freeplay this year, but note you can get in for free if you bring a pin or arcade. I think the Allentown show is quite a bit bigger and more fun for pinball with the York show being more geared toward electro mechanical games. Still think its worth a 2 or 3...

Pinballstar is a reputable dealer near you that can get you one. If you are not familiar with pinside marketplace, here is a direct link to 12 different Pulp Fiction machines areound the country...

Got it! There was one fully working actuator in there. Jerry rigged a couple of new ones from metal pen clips with some pliers. Followed your wiring to get it back together and it's now 100% Everything works now. Only thing thats iffy is it's too dark to play track 4 well on the original crt...

Anyone have a photo of the way the shifter is wired up? Proud new member of Rush 2049 club. This one was bought as a project ($300!) knowing the shifter had issues and it booted to a "bad shift screen". Well, you can easily get past that. I've figured out that the shifter is wired up wrong, but...

Okay, I replaced the potentiometer and everything works like it should. It is a relatively replacement and could be done in a pinch with electrical tape and wire snippers. I used solder and electrical tape (to keep the ends from touching each other. For random strangers reading this years from...

Okay... after waiting for my springs to come in and taking a look again pre-install, I realized the spring wasn't my problem. The hinge for the gas pedal was my problem. If you told me that hinge had been retrieved from a sunken WW2 submarine I would have believed you as it was rust city. After...

Or just move it to crabtown!

BLUF: Where do I get a replacement spring for an Outrun Gas Pedal? Picked up my first dedicated arcade, got all the servos calibrated and zeroed and tuned the monitor. However, I have discovered the gas pedal doesn't spring all the way back up when released. Is there someplace I can go to get a...

All parts now sold. Cabinet was sold to someone local for a project. Thanks all!