Search results for query: *

Mike's Arcade already sells them if he's looking for a replacement. https://www.mikesarcade.com/cgi-bin/store.pl?sku=INSTDKJRLONG

Its on ArcArc, not sure if quality is what you need. https://arcarc.xmission.com/Arcade%20by%20Title/Donkey%20Kong%20Jr/

Door seal on the cabinet isn't great either, be prepared to do some cleanup once all is said and done. No shame in having it professionally blasted, so you don't have to also store the thing afterwards.

Add grip tape to the base to finish off the look.

Kleensweep runner mats are a pretty close to what Atari used. Doubt anyone would notice unless they were side by side. https://www.americanfloormats.com/kleensweep-runner-mats/

If you want to really get creative, you can always wire this up as a pseudo-igniton...

I've done this - great motivation tool.

Looks like it's sweeping for a missing ball. Does the cycle complete when pressing down on microswitch behind ball apron?

I used to grind off the old CPOs with a drill and wire wheel attachment. While this does work, it leaves gouge marks on the metal which I wasn't proud of and makes one hell of a mess. Getting the glue off was another story. CitriStrip works like the direction says, but needed a couple of...

Is the front kickplate just held on only by screws? I need to replace the vinyl on mine and have been putting it off for ages.

Looks like PK-1375-R6 (J5) https://www.arcadepartsandrepair.com/store/connectors-sockets-pins/093-molex-connectors/molex-15-pin-093-power-connector-male-receptacle-with-wings-cc1042/

Mirror tape works well for this. https://www.amazon.com/VViViD-Vinyl-Detailing-Silver-Chrome/dp/B07QJS95SQ

+1. Reminiscent to Jaleco/Naughty Boy artwork

I have a lower coin door: https://forums.arcade-museum.com/threads/taito-classic-lower-coin-door.525723/

Szabo has had them on their site for some time now https://www.szabosarcades.com/products/pole-position-cockpit-rear-plexi-panel?_pos=2&_sid=b5954a773&_ss=r

Same repurposed Pac-Land on my upright Looking forward to following this thread.

Nice to see this game get some attention. If you have some spare bulbs/sockets, the lower plastics with Pac & Ms Pac look great backlit - Ms Pac already has a hole in the correct position (lift hole) on the playfield, just need to drill to match on the Pac side. Wire into the GI power and...

Can also check with Tap Plastics: https://www.tapplastics.com/

Square holes on the control panel are designed to lock in the carriage bolts.