Search results for query: *

Yeah the original Rush cabinets were 1 piece which as mentioned it appears that one is. I personally would NOT cut it, but if that is the only way you can get it in your house, that may be your only option if you really want it. You'd have to be careful of the wires that run through there...

If I were to get that tube, would you recommend getting something like this to put it in and apply it with? https://www.amazon.com/Needle-Dispenser-Solvent-Applicator-Dropper/dp/B00UG08QDC/ I just don't think I will need one of those larger quantities and it would be overkill.

I'm assuming you only need like a couple drops per pot? Would this be enough to use on all 4 pots in 2 machines? https://www.amazon.com/DeoxITLiquid-squeeze-tube-100-solution/dp/B0015A5AAY/

I've never used any kind of deoxit before. Do I just grab it from like Home Depot and spray a little on there and work the pot a little bit?

It's all good I found another thread on here from the late Ken Layton that has some alternatives to get so I may look into them. I guess one of my main questions is, with pots, if you are literally not moving anything, I am assuming the values should not change at all? The reason I ask is...

lol you just reminded me when I was swapping pots a few months ago I snapped a pic. It also is definitely not plastic.

Anyone know what pots are used for the pedals and wheel? I am debating replacing all of mine because in most of them I seem to get slightly jumpy values reading from the pots when they are at neutral or fully pressed.

I sold mine about a month or so ago, sorry!

I can't remember if everything had prices in the warehouse or not. I know that SOME stuff did though. And I'd say MOST of the games were incomplete and/or had stuff missing. Like he had probably over a dozen Golden Tee cabinets, but like some were missing track balls, monitors, boards, etc...

I got my Maximum Force from him. I live like 45 mins away. I saw his post on Facebook for the cabinet for like $375 I believe, and it had issues with 1 or both of the guns, and I offered him $300 and he said sure. I went up on the weekend and snagged it from him. I had walked through there a...

I actually just ordered a new ballast to try replacing it. It was only $18 so we'll see if that fixes it. Easier and cheaper than just putting a whole new fixture in there. I did get a new starter and that wasn't the issue either.

I was referring more to using the same fixture with an LED bulb instead of replacing the whole new fixture. Initially it was because I thought the buzzing noise I was getting was from the bulb, but turns out that wasn't the cause - it's either the ballast or starter at this point. I'm going to...

Has anyone replaced the marquee light in these with an LED light? If so, how was the process? And got any pics?

I got all the details in my work log thread here - https://forums.arcade-museum.com/threads/my-2-rush-2049-se-conversions-to-emulation-racing-machines-work-log.554376/

Here's a video I just snapped of Project R for those who want to see it in action.

Yeah I had a thread asking bout monitor suggestions initially, or I replied to another thread about it. I decided to just start my own thread to document everything in case someone else ever wants to give this a go, and for myself to go back to when I have to setup my 2nd cabinet lol.

@journeymandt and @bobbyb13 I have covered both of your inquiries in my thread here - https://forums.arcade-museum.com/threads/my-2-rush-2049-se-conversions-to-emulation-racing-machines-work-log.554376/ As for the CRT question, I would assume it would work on an original CRT just because it...

I messed with Project R tonight for like 30 minutes. At first I couldn't get my pedals to work but after some messing with settings (which in turn are obvious now), I got it working and it's pretty awesome. I only got to try Rush The Rock on it just because it took me a while to figure out how...

I don't have any information on it just yet, but later this week or weekend I will grab it and try it out and report back. I got my sound, lamps, and FFB all working with my PC and emulation after like 3 weeks of pain, but pain that was just very hard to track down as to what was causing it. I...

The 60 fps on the real hardware when playing without drones is really nice too.