Search results for query: *

Right you are, my mistake. Last time I looked at their page back in mid-March, they were out.

Looks like the Ebay seller pm-sam hasn't sold any of his custom AVG chips recently, and doesn't plan on making any more any time soon: https://forums.arcade-museum.com/threads/which-atari-avg-replacement-is-best.492797/ The Ebay seller sdotaboz sells at least 2 TTL variants of a different...

Recently I noticed a bug in the game that allows you to get inside barriers: https://www.ataricompendium.com/game_library/easter_eggs/arcade/arcaderallyx.html

New link: http://www.classicarcadeboards.com/arcaderepair.html

These are the last ones I bought on Ebay: https://www.ebay.com/itm/322361019203

Years (decades) ago I had a Millipede table with a monitor like that. Turned out to be a bad cap.

Keith Smith did an article about this and noted how both Playmeter and RePlay really didn't single out Rally-X as the 'it' game to have: http://allincolorforaquarter.blogspot.com/2014/01/video-game-mythbusters-was-rally-x-hit.html The quote he mentions from Steven Kent's book (pg. 116), The...

Old site. New site: https://www.ataricompendium.com/game_library/easter_eggs/arcade/arcademissilecommand.html

Where can the -03 ROM code be downloaded?

I know you can run the original F&F w/o a video card. The Drift might require it. Try it and see. Worst is the screen will lag or you'll see some video 'tearing' at which point you'll have to install one and reinstall the software.

Check this thread: https://forums.arcade-museum.com/threads/fast-furious-drift-pc-replacement-options.437322/

Is it possible to hack or update the code to convert it to Frogger?

The resistors in question are R1 and R4 and are 330 ohms. The 2 tantalum caps can be replaced with 22uf 50v caps.

I've messaged Channelmaniac several times, but haven't received a reply.

Correct, there's no starter for those. The power is direct from the power supply. The bulbs are the bayonet style.

You have the correct pot value? 5k ohms. Unplug the foot pedal harness cable. Using the pcb end of the harness connector, put the game in test mode and jumper the center pot pin to each of the other pins, for the min (0) and max (at least 64) values. If you're not getting at least 64 with...

I'm dealing with a similar issue with those tantalum caps now and someone on here recommended using these: https://www.arcadepartsandrepair.com/store/components/capacitors/axial-capacitors/22uf-50v-axial-capacitor-105c/

Revisiting this issue as I have an S.I Deluxe sound board that's doing this. It displays "TILT" for a second or two, the screen 'resets' and as soon as it displayed the "G" to say "GAME OVER", "TILT" appears. I know the issue is isolated to the sound board because if I put another sound board...

These (full-size, not slim) Dell models should work using just onboard audio and video: - Dell Optiplex 740 (onboard sound not supported in v3.05 of F&F) - Dell Optiplex 580 - Dell Optiplex 380 (video card is needed for Drift. Not sure about original F&F) - Dell Optiplex 390

Never saw this one before and the manual doesn't mention what it means.