Search results for query: *

Atari x and o football. I have owned this for 30 years. Trackballs have both recently been rebuilt. Works perfectly, Button installed for free play. I am including the 2 inserts as shown and an extra Board9not tested) A little war as shown but in excellent condition . $850

Atari x and o football. I have owned this for 30 years. Trackballs have both recently been rebuilt. Works perfectly, Button installed for free play. I am including the 2 inserts as shown and an extra Board9not tested) A little war as shown but in excellent condition . $850

Machine is in great shape. Everything works 100%. Has a card dispenser. No cabinet damage. Control panel overlay is cracked in one place. Plays great.Asking $2500

Bally 831 Slot machine. Plays 100% 3 coin 25 cent Machine. All original. See attached photo . I have a video also but can't post. If interested send a PM with email. $650

I have a slugfest card dispenser and a ticket dispenser. Both 100% working and tested. $750 for both. $500 for card dispenser. $300 for ticket dispenser if sold seperate.

Plays like new. All original. All original art. Trackballs just rebuilt. Alot of fun but sadly must go. $1000

Fully working omega race upright. Cabinet is good, has some scratches $900

For Sale is a Konami Super Basketball . I am reposting as game was never picked up. Plays 100% Works perfectly no issues. No real damage to cabinet( a couple of scratches or scrapes) I also have side art for it thats never been used. Price is $450

I have a slugfest for sale. Plays perfect. Has card dispenser. looking for $2500 but am negotiable.Looks great.

omega race ship jumps Can you tell me how to check that with a dmm.

Omega race no sound Please read this post maybe you can help. Let me just recap the issues I have. I have no sound. I swapped Z80 chip on daughter board and replaced AY38912 chips on daughter board. Both amps read 10v. Touch the back of pots and get humm and can control the volume on humm...

re: Omega race Help or WTB Daughter board Let me just recap the issues I have. I have no sound. I swapped Z80 chip on daughter board and replaced AY38912 chips on daughter board. Both amps read 10v. Touch the back of pots and get humm and can control the volume on humm. Spinner has a problem...

Omega race no sound So originally I had another Z80 chip for the daughter board and put that in. No sound I have since swapped chips with mother board and got no picture and no sound. So I think that chip might have been bad too. Swapped them back and no sound and spinner is only 6 and 12...

Omega race no sound usually yes. but this last time only the 1 credit 1 player button lit. but they all work. As well as everything is normal except for the sound problem.

Omega race no sound i encounter another problem. every time i reinstall the daughter board the spinner works fine for a while. then it revers back to only 6 and 12 oclock.got into diagnostic and noticed angle E1-2 is HI E1-4 is HI E1-5 is LOW they do not change like the others. Played with...

Omega race no sound So I checked the amps and they are not hot. I am not great at desoldering. still need to practice. I do get hum when i touch the back of the pots and they will get louder if i increase the volume on the pots.

Omega race no sound So i cleaned all pins on J2 and all is well with the spinner. Checked L3 and L6 amps and am only reading 10 volts. Is the voltage difference enough to cause no sound. This could be my multimeter since it does not measure in tenths only whole numbers. I also checked the whole...

Omega race no sound So l did as suggested and still no sound. Replaced both AY38912 chips. Still no sound. I have another problem now. The spinner only goes from 12 to 9 o’clock.spinner worked fine defore. It has the grey encoder type not a pot. Think all problems in the daughter board. Any...

I'm really pretty new to this. Omega race has no sound. I touch the back of pots on daughter board and get a buzz. Thinking maybe Z80 chip. If so can I use a different chip. It has Z80ACPUB1.

I would be interest in the encoders if you still have them