Search results for query: *

I've recently started having issues with my gas pedal assembly that I'm running on Jason's Pi Position setup in my old PP cab. I pulled the pedal assembly out to clean it up and reflow the pot since acceleration had been a little flaky. After reinstalling it, I got a low-voltage error when...

I currently have two K7000 monitors with arcing, cracked flybacks. I haven't been able to really work any down in my basement for the past few months because I was storing a couple of motorcycles for a neighbor while he was moving. He came and picked them up the other day, so I figured it'd be...

Hey guys. Any ideas what would be causing the image on my G07 monitor to not be completely centered? Currently there's about a 2-3 inch gap at the bottom of the screen. I moved the vertical jumper to the bottom position, and it made a slight difference, but it's still a good bit off. Messing...

Anyone have a source on a CRT neck socket that will work with a 19" G07? I need to buy a replacement, and I'm having a hell of a time finding one.

I've got a Robby Roto cabinet that was converted to a Skykid at some point in it's life. I was able to remove a lot of the black paint with alcohol and Magic Erasers, but the original artwork is faded pretty bad, and the left side ended up having a good bit of it missing completely. I'm fairly...

What's up guys, just having some issues with the remote board on my Nieman 3M27SF chassis. The screen was originally cut off at the top. The picture itself looks great, it just needs to be adjusted down a few inches. Turning the vertical pot (VR515) has no effect on the screen, so originally I...

My Gauntlet Legends cabinet has started making "popping" noises every so often when it's running, each time causing the screen to jump a little. I had a similar issue on a Wells Gardener last year, and it turned out to be an arcing flyback transformer. I'm assuming I'm having the same issue on...

Just wondering if someone could point me towards a suitable replacement 5k pot for a Roadblasters pedal assembly? https://na.suzohapp.com/products/driving_controls/220-5373 Happ said these will work, but there's I closer fit coming out in March. Just curious what everyone else uses.

Edit: ....Aaaaaand I just realized I posted this in the wrong forum. :/ Picked up a semi-working Gauntlet Legends cab yesterday afternoon, and I have a few questions. The wiring that supplies power to the HDD is directly connected to it from the power supply, instead of through the Sound/IO...

Made a little bit of progress with my Super Pac-Man cabinet today. My jamma harness came in the mail this afternoon, so I wired up my switching power supply along with the video section and speakers to a cheap 16-in-1 board just to see what happened. I can hear the sound just fine, but all I'm...

Picked up a super cheap Ms. Pac-Man in a Super Pac cabinet the other day. Definitely needs some work, but I figured it would be a fun little project to mess around with. The wiring has got me a little confused. Was there ever a version of Ms. Pac-Man that utilized the large power supply chassis...

Looking for a few of the original Cruis'n USA sit-down control panel buttons like in the attached photo. Right now I just need the Start, Radio, View #2 and View #3 buttons.

I just recently did a cap kit on the WG7500 in my Cruis'n USA, and now it looks like I've completely lost sync. https://www.youtube.com/watch?v=7VtzwOlKDmk Any particular components on the board I should check first?

So, Roadblasters decided to crap out on me the other night. I've come to the conclusion that it's physically impossible for all of my cabinets to work at one time, lol. On startup, all I get is the garbled mess in the picture below. I actually got the game to boot into test mode once, and was...

Just recently picked up Atari's Assault, and the left hand joystick isn't quite right. It almost feels like its grinding regardless of the direction I move the joystick. It feels like it catches on something before it completely moves in a certain direction. The rubber cushions were both...

Recently the K7000 monitor in my ArcadeSD cabinet has started to make static "popping" noises. The noise isn't loud, like the monitor is getting ready to explode or anything, and honestly I thought at first that it was just the monitor heating up like normal. After awhile though, the screen...

This is probably a really stupid question, but I'm still learning all of this stuff as I go, so bear with me. I got a 24V power supply from Happ the other day to replace the old, worn-out one in my Point Blank cabinet and I'm a little confused about wiring it back up. On the original 24v power...

Just recently picked up a Point Blank here in SC, and I'm having a really weird issue with the power supply / gun location PCB. When I got it, the switching power supply wasn't working, so I replaced it with a Happ Power Pro this afternoon. For some reason, the power supply shuts off when I...

I figured I'd see it pop up here on KLOV, but I may have just missed it. It was posted on Craigslist around the end of November and it seems like it was up around Charleston if I'm remembering right. I messaged the guy pretty quickly about it, but I ended up being #3 in line. He said it had been...

Anyone have a good source for a suitable Pole Position replacement speaker? I'm needing a 6x9 4 ohm speaker, but most of the ones I'm coming across are either unshielded or 8 ohms.