Search results for query: *

The story with this machine is it was originally located in a grocery store in Louisville, KY. My uncle's friend picked it up in 1988. The grocery burned down 2 weeks later! It sat in his garage until I picked it up in 2017. Notice the water damage at the bottom. This was caused by it sitting...

This machine came out of a grocery store in Lousville in 1988. 2 weeks later the grocery store burned down! It sat in a garage outside of Louisville until I picked it up and drove it to Memphis in 2017. It has sat in my garage ever since. I don't seem to have the time/money/energy to continue in...

I may have to settle for the midway/galaga leather t-molding. I need it for stargate. The original tmolding I took off before painting was in rough shape. I tried to put it back on but it broke in half in a few spots.

Almost done with my decon/resto. This is a K4600 chassis/monitor, recapped, cleaned of dirty and adjusted to the best of my ability using the cabinet's mirror and the test patterns. I have the bezel off to restore next so there's a light that shines down on the tube in the attached pics/video...

*edit* Problem solved, see post #3 for how I screwed up, haha */exit* I'm about 95% done with my resto. Just gotta redo the control panel with a new cpo, j-stick refurb and buttons, populate the coin door and do the glass bezel or buy another one. I fired it up today and everthing lights up...

Tengen Tetris for the NES! I just watched the newest documentary and I forgot I always meant to find a tengen tetris for the 2player action. I'm looking to buy cheaper than ebay prices if anyone wants to cut some slack.

Having it delivered tomorrow at noon! He said he had lots of calls but no shows. I'm taking a risk on it so F it for the low price.

Which clear coat to spray on newly painted machine. I have a stargate with a fresh strip, paint and stencil and i would like to somewhat preserve the work. I used oil paints out of an lvhp setup. I'm about ready to take it home. It definitely will need a clear coat and i would like to spray it...

I might be able to get a star trek and a star wars upright Check out these pictures and give me some quick thoughts. It's a good friend of my uncle's we've know for years. This is up in Louisville and he said "$100 apiece and they're yours". He has put off selling for years. I'm having my...

$425 is way too much right? http://forums.arcade-museum.com/attachment.php?attachmentid=117601&stc=1&d=1344487564 http://forums.arcade-museum.com/attachment.php?attachmentid=117603&stc=1&d=1344487586 http://forums.arcade-museum.com/attachment.php?attachmentid=117602&stc=1&d=1344487576...

I would love to start my collection with a 50s, 60s, early 70s pinball. They're not boring to me. There's a Hot Line fishing theme from 1966 for $500. A bit more than I want to spend, but my budget would be about $500.

Ok, I was at my uncle's in Louisville last week. The machine was working great, all sounds were fine and dunk the dummy worked as it should. But there was battery corrosion on the board behind the glass. So I had to unsolder the battery connector, clean it up, reinstall and add new batteries...

Ok, I'm back at my uncle's house in Louisville for the week. (Last year he hooked me up with a machine I'm still converting back to a Stargate. Weather has put that on hold for another month atleast). I think we're headed back to Memphis this Saturday, so this issue is time sensative. I'm hoping...

http://memphis.craigslist.org/for/3040368004.html I wouldn't mind atleast getting it for the monitor atleast. But I have a galaxian pcb looking for a home.

Shipping to Memphis, TN. Thanks for looking.

Ok, here is what I'm trying to do. I already have a full Galaga power supply, control panel, wire harness. I also have a Mappy PCB that I can plug in and play at will. I want to know if I can buy a Bosconian control panel and PCB and plug it into a galaga wiring harness/power supply. Has...

I am looking for 2 complete coin door harnesses. One for my Stargate deconversion/restore and one for a Multiwilliams scratchbuild. I'd love for it to be an original harness looking for a new home. But, I'll take a new rebuild, Dokert style if the price is right. Are there any out there? Here...

so i'm over here spraying this stencil work for my stargate. the fantasy of having a machine in my house is getting closer to reality. I was just thinking about my cat and had a horrible thought. has anyone ever had their cat use their cab as a scratching post? lol, i'll murderize it!

Man, stenciling is time consuming. I figured I'd get to paint today, but it took a few hours to get the stencils on and everything masked off. overall it was pretty fun and I'll be doing it again soon with my multiwilliams scratchbuild. Got these from gamestencils.com. They have a nice PDF...

Ok, finally got Stargate working thanks to Ken. I realized I'm missing the harness that attaches to the coin mechs. What is this harness called so I'll know when I decided to buy? I'll be interested in 2 of them.