Search results for query: *

Hi everyone, I recently was gifted a defender cocktail and during my initial troubleshooting found that I am unable to get to Test Mode. When I push the advance button I get to book keeping mode, but when pushing the auto up/manual down switch the behavior of the advance button does not change...

In about a month I have a contractor coming to frame out my unfinished area of my basement where my games currently are. The area is about 21x22 with a bit more space around the door when you walk in. I have plenty of power available (two 200amp panel and a generator, not putting games on the...

Looking for the mounting plate for a 2 stack PCB.

I’ve been working on a DKjr set that had a video board that was converted to Mario Bros and an untested CPU board that was missing all cpus and EPROMs. I believe I have the video board back to stock, had to fix some cut traces, replace some ecl ram, ls32, ls157, ls139 chips, and burn new...

I just picked up a broken DKjr boardset, missing roms, ribbon cables, etc, that im going to try and fix. The video board has a ton of mods to it, jumper wires everywhere, piggybacked chips, cut legs, but I don’t see any lifted or cut traces on the board at first glance. Could this be a Double...

Hi everyone, looking to see if anyone has some non-working DKJr board sets by chance. Preferably complete, but missing roms/z80 etc ok. I will need the metal plate. Looking for a deal so if you have one laying around you will never get around to fixing, let me know! Thanks!

I have a spare galaga board that I borrowed the 2732 EPROMs on the video board from to fix another galaga cpu board….figured i could easily the buy new 2732s and burn them. Problem…I don’t know which rom set has the video roms! Galagamw only has the CPU roms, so I take they are in the namco...

I have a MinPro TL866CS Programmer and im curious if others have the same issues I am or if a bunch of my chips are just bad. I bought some 2532s on ebay, and rewired a socket so i could read/write it as a 2732. It worked for 3 of the 5 chips. I think 2 were just bad but i think they were...

Trying to find more information on this monitor. The owner found an article about the the company who sold it, but other than that, no clue what this is, or if it’s an old rebrand or something. Anyone seen this before? I didn’t see any labels when I took the pictures. Thanks in advance!

I asked this question years ago, like 2010, however the solution was just to swap the sanyo out with my 4900 monitor from Mario to my DK. Now I find myself in a situation working on a DKJr with no other Nintendo game available or Sanyo. Has anyone ever modded a frame to fit a Nintendo...

Adding Futurama for PS2. Ghoul patrol available. I really need a harness and PCB. UPDATE: Trade has been made for the gameboy games, incantation and Demons crest. Update: added some snes games, post #8 on this thread. I have some harder to find gameboy games I’m willing to let go, and figured...

Starting a new thread since I know my issue now is definitely related to this chassis…. I have a KTN-2001 that will not sync. I can dial in H-HOLD kind of but the screen never stops rolling vertically. So far I have done the following: 1. Replaced 74LS86 2. Removed and Verified Q801 and Q301...

I just picked up a few KTN-2001 monitors and could not get them to sync with a negative sync. The chassis only has a 6 pin connector for input, and the manual states positive sync. Am I SOL? Or can I convert the signal from negative to positive? I read something about using an 74LS04 IC to...

Hey guys. Been a while since I’ve been on here. I just picked up an empty DKjr cabinet and trying to get it back to life. It was kind of a Mario bros at the time so I have a Mario Bros bezel and Marquee at the moment, but think I’m going to try to get it to either DK or DKjr, or a double DK...

Yesterday my son was messing with my TMNT which admittedly needs a cap kit, but it works ok for the moment minus SLIGHT hula down the sides. He then went and turned on my TSPP machine and when he started hitting the flippers, i noticed the screen on the TMNT started bouncing really bad every...

I am missing one yellow leaf switch from a TMNT. Anyone have the button and holder with switch laying around?

Does anyone know where I can find the connector on a TMNT jamma harness for the control panel? I’m talking about the connectors for player 1 and player 2. The jamma harness in my cabinet was hacked so I’m trying to get it wired back correctly. I found the male version on eBay, but I need the...

Hey everyone, I’m currently working on a restore for a TMNT, and this is my first stripping/sanding/painting and full side art cabinet. Typically in the past I’ve worked in Nintendo cabinets and they are always so nice a smooth it’s easy, and they don’t have full side art. So I was wondering...

Looking for a top bracket for my TMNT.

I recently picked up a Single speaker 4-Player Konami cabinet that was converted to a UMK3. Time to fix it up and make it a TMNT! The cabinet rough, but I think it’s savable. Just dirty and some damages around the edges. When removing the marquee there were 3, yes 3! Wasp nests hanging...