Search results for query: *

Saw this on ebay (not mine) for anyone looking for a Tempest project. It's been converted to neo-geo. www.ebay.com/itm/131847160197

Typical wear $55 + shipping

Anyone know someone that sells these? Mine has a big crack in it. I am not looking for a horizontal width coil, this is a different part. The part number on mine is A39835C. It's located at L502

I'm restoring a Stargate control panel. I just applied the overlay, but there's about a 1/4 inch gap between my metal joystick housing and the control panel overlay. What is the overlay supposed to stick to above the joystick? It seems I'm missing something.

I've been having a odd issue with my G07, I've been working on bullet proofing it and dialing it in. However, the picture shrinks as you approach the edges. Especially on the right. Does anyone know what could cause this? Here's the history on the chassis. It's had a full cap kit and tube swap...

WTB: Williams Metal Mounting Plate for Sound Board/Power Still looking for the metal mounting plate for the sound/power pcb, if anyone has one. Used in games like Joust, Robotron, Stargate, Bubbles, etc.

Is there a parts list online somewhere? or can anyone tell me the values of R520 R510 R420 R525 D507 D504 Smoked R525 by doing a width cap swap. Everything was going fine until I tried the lowest value cap I had. .10uf 250V. Anyways, I'm going to shotgun the rest of those parts before powering...

Does anyone know how to enable attract mode on the Super ABC 16-1 Pac-man kit? Mine just boots up and stays on this screen. I'd love to be able to turn the game on and not worry about burn in. It says it's one of the features of the kit "Attract mode cycles through all games to avoid monitor...

This is not my auction. I ran across it looking for arcade parts. I think this guys about 15 years too late, for selling strange food items on ebay. http://www.ebay.com/itm/The-Pacman-Chip-/162079810140

Pacific Arcade Company Pac-Man Cabaret Front Art Review Lately I've been trying to improve the aesthetics of my Pac-Man cabaret. Originally, my cabinet was missing the metal control panel. Instead, it only had the underlying piece of wood that someone had sprayed painted gloss black and slapped...

I just did a tube swap (with yoke swap) and I'm following a tutorial on purity adjustment. However, I'm having an issue. In the tutorial it says bring the yoke as far back as you can on a red test screen. Then you adjust the purity rings until all the colors are equal. The tutorial shows all...

Can anyone explain to me Ian's Horizontal Curl Mod? It didn't make much sense so I ended up following Bob Robert's instructions. Ian's says: Horizontal Curl Modification 1) Remove and discard C501 2) Remove C303 and install it in C501 with the positive lead in the hole closet to the edge of...

I just picked this baby up, for free, via craigslist. It's a 1986, 19" RCA FLR471WR Going to try my first tube swap with it. I opened it up already and found it had an A48AAB11X tube, with a CR24 socket. I read that the CR24 socket is essentially the same as the CR23, I believe. Just the colors...

Hi guys, I'm trying to repair a g07-CB0 monitor. I hear static when I turn it on, but there's no neck glow. Flyback looks good, no cracks etc. I followed the G07 repair flow chart, found that C511 was bad, replaced it. B+ is good, I adjusted it to exactly 120 volts. Reflowed the solder on the...

Does anyone know of a store that sells these two tone buttons? or the old leaf buttons that come apart, so I can put together my own?

Looking to buy the two large metal mounting plates for Williams game boards, used in cabinets like Robotron, Joust, Stargate, etc. 5-12-16 FOUND the large one, now just looking for the small power/sound mounting board

So I've recently regained my interest in arcade games. I've had a Stargate project in storage for about 9 years. I just started working on it again :) I will get pictures of the cabinet soon. I just took off the control panel last night and started working on it. In regards to the control...