Search results for query: *

Up for sale is a very nice, working Nintendo Vs pcb w/ Dr. Mario daughterboard on one side, and Tengen Tetris on the 2nd side. Both sides work great, Tetris has non-original eproms and uses the SuperMario PPU (RP2C04-0004) so it can be easily switched to any game that supports that PPU by...

Up for sale is a nice working 1943 pcb (JAMMA) + operators manual. $250 + shipping (PayPal, US only)

Up for sale is a working Rush n' Attack pcb - $125 + shipping (PayPal, US only) PS - This board uses the Konami Classic pinout, you will need a Jamma adapter to play it in a Jamma cabinet. Adapter can be found here: https://www.arcadeshop.com/i/363/konami-stern-series-jamma-adapter.htm

Parting ways w/ my Mister Jamma Setup: DE-10 NANO w/ 64GB SD card, AC Adapter IRKEN LABS Jamma Expander w/ HDMI cable, USB cable, 2pin power adapter cable, 4 mounting screws Mini-Keyboard w/ USB adapter for DE-10 NANO $400 - PayPal, US Only ------- The DE-10 Nano has not been updated in...

Up for sale is a working Raiden Fighters Jet pcb, the single-board US version. This version has all fighters unlocked and available to play from the start. This is NOT the Chinese clone that was released with inferior sound, it the official US single-board release. Board stencils says: "(C)...

Parting ways with a 100% working Raiden DX board, with the Yamaha sound chip. This is the original hardware release, not the 1996 "new version" with cheaper sound hardware. The title screen says "US License Fabtek (C) 1994 Seibu Kaihatsu". Board stencil says "(C) 1993 Raiden II DX Seibu...

Found this: https://www.youtube.com/playables/Ugkxh6_qVyD8REm5RO9C3X1wEpFNk-o3E02t It is a browser based Pac-man with 13 stages, where the speed gets faster at a steady pace as you play. Top speed is "DOOM", every time you die the speed goes down a notch. You get plenty of extra lives, so not...

Looking to buy a 25" K7000 for my MK2 cabinet. The chassis I have used before was a K7193, there are a couple other variants in that same series that should work.

Looking for a working K7193 chassis for 25" Thanks!

I have an HP 16500C that works great, but it is such a beast. I have cards for the 2 channel oscilloscope & 100mhz Logic Analyzer, and the provided functions have covered my needs well. I'm looking to upgrade to a unit that is smaller, lighter, and has an LCD (I'm not interested in the USB...

This year just keeps on giving. Forget trying to get a PS5, just try buying an FPGA these days...

Works great, $60 shipped in the US. Game list: https://www.yumpu.com/en/document/read/19236655/mvs-100-in-1-neo-legend

Anyone else back this kickstarter project? INSERT COIN: INSIDE MIDWAY'S 90s REVOLUTION The screener has just been released to backers. I've watched about 40 minutes so far, lots of interviews with the usual suspects and talk about Midway/Williams and how the games evolved from early roots into...

4x Sanyo EZ20 19" cap kits from ArcadeShop $16 shipped US (for all 4 kits) Bought 3-4 years ago, never used. This is the basic Sanyo kit ArcadeShop sells, not the "plus". D9200 cap kit - $9 shipped US Also bought 3-4 years ago, never used.

2x 82s126/29 EEPROM kits - fully assembled and ready to use 2x 82s126/29/31 adapter pcbs 16x Winbond W27C512-45 EEPROMs $50 shipped US The above parts can be used to replace 82s126/29/31 PROMS, found on all sorts of 8bit game boards, usually used as color palette output in video hardware...

EPROM LOT - $50 shipped 27C128 x 10 27C256 x 20 27C400 x 2 27C301G x 9 27C4096 x 8 27C1001 x 10 27C010 x 4 These are EPROMS for the later era of games (e.g. CPS-1). All acquired off eBay over the years, bought as "erased & verified". Consider untested, some may need erasing.

Thinning out the herd of parts, here is a lot of CPUs - $60 shipped USA Z80 x 4 (tested) 8080 x 2 (tested) 68000 x 4 (untested) 6502 x 25 (spot tested) I spot tested a handful of the 6502s, especially the ones that looked to have been re-screened pulls (all worked fine). Most of the rest are...

$35 shipped in the US Nice, clean board set. Boots to garbage screen, watchdog is tripping at regular interval.

Vs. Unisystem bare panels - $15 each ($25 for both) + shipping (US & Canada) One panel has two generic micro switch buttons, but does not have the button holders on the back. The other panel is completely bare and is missing one of the lockdown clips on the back. No wiring or other parts...

Lot #1 - SOLD Working & legit Samurai Shodown II MVS cart w/ repro color label Black Shockbox Original marquee (faded & yellowing) Samurai Shodown repro color label Lot #2 - SOLD Black Shockbox w/ Blazing Star artwork (GAME CART NOT INCLUDED!) 2 repro MVS cartridges (no screws)