Search results for query: *

Pretty girl! Too bad her voice doesn't match her looks.

You have a very cool game room!

Thanks for your reply. I am not getting 5v at pin 14 of Z1; I think this is the problem. My problem now is I can’t seem to trace the 5v back to the source. I cannot figure out from the schematic where the 5v is coming from either. Does it go straight to the 5v of the power supply? I...

The only display I am having problems with is the credit/match display. The missing segments are “B” and “C”. So I changed out the Z2 (UDN6118) chip with a new one. But no change, I am still missing the same two segments. After looking at the schematic, I am starting to think it could be...

Have you tried Great Plains Electronics? http://www.greatplainselectronics.com/products.asp?cat=41

I would take a look at this site. http://marvin3m.com/fix.htm It should help to point you in the right direction to get started fixing your pin. I would also check out http://groups.google.com/group/rec.games.pinball/topics. This site and the RGP forum are great sites to get help with...

Today I got a new knocker solenoid. The new solenoid did not come with a plunger, only a sleeve. So I took the plunger off the old solenoid (it was stuck in there from over heating), and then slid it into the new one using the new sleeve. Is it that simple? Next, I soldered a new transistor...

I would try http://www.pbresource.com/

This is unbelievable—I got it working! Thank you so much for your help! It was a loose connector. I didn’t think it was a connector because I wasn’t having the problem before I replaced the transistor. But you were right. It is great having the machine working. My brother-in-law has had...

I think I screwed up. I changed out the Q59 transistor with a NTE261. Now after I hooked the board back up only the light flash. Did I fry the board? Please help!

Oops! Yes, the transistor. I was able to get the solenoid to kick by grounding the tab of Q59 transistor. Do you agree the next step is to try changing out the transistor?

Thanks, I will try replacing the chip. I need to first buy a solder sucker to remove old chip. I will keep you updated.

Here is what I have tried so far today. 1) The switch-test registered 67 when the ball was in the outhole. 2) Manually pressed the ball trough connection with finger. It registered (board kept resetting while I pressed it), but never could get the solenoid to kick. 3) I removed the driver...

I live in the San Antonio area, so not too far. Any help would be great. I found the instruction manual, and ran the self-test. First, I ran the switch test. A 99 was displayed which indicates all switches are open. Does this mean the switches are okay? Next, I ran the solenoid test...

I am trying to get my brother-in-law’s pinball machine working. The pinball machine is a Gottlieb 1980 Spider-Man. The problem is the machine will never kick the ball back into play. The machine just keeps resetting. While the ball is in play the machine seems to be working perfect. I have...