Search results for query: *

  1. Data East DMD needs to warm up before working?

    I've got a Ninja Turtle machine and the dot matrix display works fine after a few minutes. But if the machine has been off and gets turned on, there is no display at all for about 2-3 minutes. After a few minutes the display slowly starts working again (usually the lower right corner starts...
  2. Data East Ninja Turtles display doesn't work suddenly

    i just realized that the power cord does NOT have a 3rd prong. I'm pretty sure it did before... maybe it broke off while getting unplugged or plugged back in? would that cause the screen to not work maybe? everything else seems to be fine.
  3. Data East Ninja Turtles display doesn't work suddenly

    i tried resetting the connectors on the back of the board, anywhere else to check?
  4. Data East Ninja Turtles display doesn't work suddenly

    Data East Ninja Turtles display doesn't work suddenly haven't turned the machine on in a couple of months, and suddenly the LED scoreboard doesn't work anymore. I tapped it a few times and checked the connections. Sometimes part or most of the screen will come on, but not always. any help?
  5. Jamma 60-in-1... can you continue on Ms. PacMan?

    easier said than done with a 7 year old girl... and 31 year old boy
  6. Jamma 60-in-1... can you continue on Ms. PacMan?

    just to get to higher levels, same reason you continue on just about any game. duh.
  7. Jamma 60-in-1... can you continue on Ms. PacMan?

    I have a cocktail table w/ jamma 60/1. it has dummy coin doors so you cant just add more credits to allow you to continue. other than just going to the settings and making it just a ms pacman arcade (not 60 in 1) is there a fix to allow you to continue on games? i found some old posts on...
  8. Anyone upgraded a Ninja Turtle or Freddy pin to LEDs?

    looks good. what did you spend on the LED lights? find a kit anywhere?
  9. Freddy "drools" the ball out instead of spits it out

    Freddy "drools" the ball out instead of spits it out My Freddy pin has been working great, but lately he started slowly drooling out the ball from the Freddy mouth instead of projecting it out. So when he does spit it out, it just roll straight down, almost gets caught on the black rail in...
  10. Changed a setting on Freddy pinball (Gottlieb), and now can't get back to free play?

    Thanks Russ for your help! ...the free play issue was pretty easy… there is a white push/pull switch behind the door (I guess its supposed to be the coin door open/close button). that was stuck in the closed position, so it wouldn't let me enable tournament mode because it didn't see that the...
  11. Changed a setting on Freddy pinball (Gottlieb), and now can't get back to free play?

    There doesn't seem to be any response. But... The test switch button works and so does the volume so I think that wiring problems can be dismissed.
  12. Changed a setting on Freddy pinball (Gottlieb), and now can't get back to free play?

    no matter what I do, I can't get it in to the "tournament mode" setting. can't find a "free play" adjustment ANYWHERE!!! frustrating :(
  13. Changed a setting on Freddy pinball (Gottlieb), and now can't get back to free play?

    seems like it would be an easy fix but I can't find it anywhere. everything else works fine. the tournament mode switch has always worked fine, so I don't think its an issue with the switch.
  14. Anyone looking to buy an Addams Family pin?

    says the gallery is set to private and needs a PW
  15. Changed a setting on Freddy pinball (Gottlieb), and now can't get back to free play?

    Changed a setting on Freddy pinball (Gottlieb), and now can't get back to free play? I've had my Freddy pin for about a month, and today reset the machine to factory settings. But now when I put the switch to "tournament mode" it doesn't go in to free play anymore like it used to. I don't...
  16. Question about Popeye part

    totally greek to me dude. dont even know what you're talking about, lol
  17. Anyone upgraded a Ninja Turtle or Freddy pin to LEDs?

    Anyone upgraded a Ninja Turtle or Freddy pin to LEDs? Just curious if anyone has put LEDs in a TMNT or Freddy pinball yet. if so, was it just a direct swap out of the bulbs? any photos?
  18. Question about Popeye part

    i emailed them to see. they have the wire and the screws in stock but not the gate, lol.
  19. Question about Popeye part

    that would be it! now where can I find them, lol?
  20. Question about Popeye part

    Thanks, please do if you get a chance. Without that gate present, multiball doesnt work. I think the one way gate pushes the ball to the side which trips the multiball mode. Anyone have a part number for said gate?
Back
Top Bottom