Search results for query: *

Just reduced $1900 for everything! would like to sell all items to one party if possible. I have 3 completely restored games. Tempest, cocktail table Ms. Pac and a Centipede. Rolling thunder. Other projects. Missile Command that works, though it needs a power supply. Project pac-man, empty...

Just saw these in a highend watch magazine. Wouldn't we all like to get 3,299.00 for our 60 in 1's. http://arcadetables.com.au/#

I have a Rolling Stones Pinball machine that is acting strange. The problem is intermittent. The Ball will not eject, the bumpers don't work and the flippers don't work. Though the scoring still works. It acts like the 50v/20v coin door switch is open, but it isn't. I also noticed that if I turn...

FS: So Cal - Tempest, Centipede, Joust Cocktail Ms. Pac Due to the fact that I am getting a divorce. I am forced to sell some of my games. Tempest - Rebuilt 6100, new side art, new marquee, new control panel overlay, new paint, new T-molding. - 1000 obo. Centipede - new side art, new paint...

I wanted to get a few opinions on what you guys would pay for a semi working, with moderate ware playfield Wizard pinball machine. Second, are parts on this moderately easy to get? Thanks for the help.

Here is my first attempt at doing a stenciled restore. I didn't take many pics as I was restoring it, but at least I have a before and after. I should take more pics, but I just get so involved and forget. Hope you like.

Can't seem to find ID on Bob's page regarding this monitor, could someone please help ID so I can order a cap kit. Chassis has P837 marked on it and the neck board has P838 and it is a WG 25X3659. Thanks. Also, if it makes a constant clicking sound is the transistor pictured the probable cause...

I've been looking for Pac-Man art and have not found much. Any one know where to get it and how much? The only place I could find wanted $299.00 (too high). Thanks for the help.

Hello, I am trying to fix a GO5-802 that has the spot killer circuit LED on. The screen has a white dot in the middle of the screen if you turn up the brightness. Here is what I have done: 1. Cap kit. (Bob R.) 2. Checked PCB for X/Y signal, measures good. 3. Checked ZD900 and ZD901...

I just p/u a converted ST in an Asteroids cab ($60) and I have a couple of questions. The cab has Asteroids art work and is in need of some repairs. I'll add a pic tonight. 1. What do you think the G08 is worth and a working ST pcb? 2. Is it worth to restore it in the Asteroids cab? 3. Other...

What is with all of the back doors on these games. Can any of them have locks that work, or not be screwed in. But most of all, who has been kidnapping them. This person needs to be stopped.

Hello, I have a WG7400 that has a failure in the neck board. When the board was replaced with a working one, the monitor came up (told to me by the person I am fixing the monitor for). In the photo there is a capacitor missing from C519 (upper left). Could this have caused the problem? If not...

I am a bit stuck on fixing my 20ez. It will not lock down on the vertical (DK rolling side to side). I just finished a cap kit from Bob Roberts. I did not replace the Fly or Hot. In the manual it talks about looking at D161 if it does not lock down. So I checked diode 161 and it checks out fine...

Still trying to get my WG6100 working, but have a few questions about reading and measuring voltages off of the schematics. The other thread http://forums.arcade-museum.com/showthread.php?t=112321 Question 1: In the general notes section of the WG Quadrascan X-Y color display manual, it says...

I am trying to get a friends WG6100 monitor up and running. I have attached a couple of photos of the problem areas. I have a working Tempest that I am using to test the monitor. When I plugged it in, I started to see smoke and red hot parts in the HV area. I have taken out all of the burnt...

I could use some help with this DK problem. I have cleaned and reset all the socketed chips and I am still getting this junk on the screen. It does coin up, but I do not hear any music or jump sounds as if it were playing blind. Any suggestions on where to start. Thanks for the help.

I have a DOA G07 that is being used in my Joust U/R. I did a cap kit, flyback and hot replacement. I blew the F902 fuse on power up. After checking all of the recent component installations for correct alignment, everything checked out. I did a search to see what would cause the F902 to blow and...

Here is what happened to my latest CL transaction. About a month and a half ago I see an add for 3 games and one of the games is described as a mint right out of the factory Defender (one of my grail games). I email and state that the 500 dollars is too high for me and that I would like to offer...

I just purchased a non-working Joust for 150. After looking it over and making sure everything was hooked up correct, I turned it on and saw the display error of 1 - 2 -5. If I read the manual correct this means RAM error row 2 chip 5. Does this sound correct. Also, does anyone have any...

I am looking for a set of Missile Command U/R side art. Please let me know how much and shipping charges to 92592. Just give me a PM. Thanks.