Search results for query: teflon leveler*

I have a ton of these and have since switched over to teflon. How does $15 + shipping sound?

Single story house. Gameroom is 20' from the front door and cabs all have Teflon coated leg levelers. And not much game turnover. So I feel for you guys, but it's not been much of a problem here. I'm also older than many of you guys but far from the oldest here, so this is a good arrangement...

Cool. I'll check out the 2" Magic sliders then. Where did you get yours?

Yeah, I really only like the 2” Magic sliders with the adhesive pads. It’s much better when the slider is actually stuck to the bottom of the leveler. I’ve tried the all in one Teflon levelers themselves, and they don’t slide as well as the magic sliders on a regular leveler. Using the large...

I ordered these but haven't put them on yet. https://www.amazon.com/gp/product/B09BW12B57/ref=ppx_yo_dt_b_search_asin_title The earlier teflon coated legs that I have on my existing cabs slide pretty well on carpet and I'm hoping these will too. I have 1 cabinet with those big EZ-Slide white...

Metallica Upgrades include (This is super upgraded): For your consideration is my super nice metallica pro. Below are the upgrades and photos. Tons of uprades. Color DMD Color LED Speaker lights Backbox Panel interactive lighting Powder coated - hinges, legs, coin door, rails, apron and...

I'm apologizing in advance as I know this has been beat many times. The majority of the posts are outdated or the parts are NLA. Anyway, I think I am better off with leg levelers with Teflon? as I am currently on carpet and may eventually be on a laminate floor of some type. Any current...

I have an undocumented Home Use Only Austin Powers. Super condition. Couple of small dings on cabinet. Playfield is in immaculate condition. Looks and plays fantastic. Has Nvram installed, art blades and teflon leg levelers. $4500. Cash/carry.

No, it does not matter. As long as the threads are the same. They can be the 'pinball style' (with the metal bottoms), or teflon, or rubber, there are many kinds, and many threads about them. Here's an Advanced Search for 'teflon', which finds many good threads...

Dumb question. I’m in the midst of a restore and am replacing the leg levelers, as they’re old and rusted. The manual calls for a pinball leveler. https://www.thepinballwizard.net/cabinet-parts/heavy-duty-3-leg-leveler-with-tightening-nut-silver-chrome/ My question is, does it really matter...

I used those beefy ones on my Asteroids Deluxe. They are really nice for large heavy games for sure.

Do you just need the screw-in feet, or the metal plates they attach to? I recently went through this with a few of my cabs. I don't like the ones folks have shown above, only because they don't have that much 'meat' to grab the wood with, especially if the holes are gouged out, and/or if the...

Humm, this TPR stuff is new to me. I always thought they were referred to as "nylon" or "teflon" levelers. Needless, all these types that help protect the floor surface are the ones to get. Just find the correct size at the best price. :)...

Mix of a few pin/vid. Everything is new except the atari shit. 30$ shipped. Pcb standoffs are gottlieb-qbert style from the missed shop GPE. New williams/bally coil. New leaf for flipper coil Teflon leg levelers Some atari tb parts

So you buy the ones I already sell Here ya go https://www.arcadeadventures.com/set-of-4-glide-rite-leg-levelers/

I have and use both of these, the first set is good for pinball, but i find that they start to flatten and the metal gets close to the floor. I use 3/8 wheels from home depot on the back (i've bent the ones from amazon even sunk all the way down, then these leg levelers on the front. The second...

I've bought those (from Marco) before and the base is smaller than standard leg levelers. Personally, I'm not going to buy those again. The Outwater ones, or the ones at Quarter Arcade, or the ones sold here (which you can still find from several online sources) are what I'd use in the future...

AVOID the top ones. Absolute garbage.

In any case it's a teflon coated leg leveler of about the right shaft length with the right threads.

I'd love to have 4 more of these as well and would pay good money for another set. But as others have said, they disappeared a long time ago, maybe 13-14 years?