Search results for query: leg leveler*

  • Search titles
  • Content: Threads, Posts
  • Order by date
  1. Anthony605

    SOLD - PARTS New "T Nut Leg Leveler Blocks" for Williams Cabinets like Sinistar, Joust, Robotron, Etc.

    I made up a couple of sets of wooden T-Nut blocks to repair my Sinistar leg levelers. The blocks where the t nuts fit in were all beat up and caused the levelers to be very loose on my Sinistar. I made an extra set for my Joust but it turns out that I did not need to as the Joust was fine. I...
  2. nerdygrrl

    SOLD - PARTS New Leg Levelers 6 @ 3 inch, 12 @ 2 inch $15 + Shipping

    I have a ton of these and have since switched over to teflon. How does $15 + shipping sound?
  3. 1970

    Midway Cocktail table 3/8 Leg Leveler Mounting Bracket

    Need one or two of them. They screw in the corners of the cocktail table and the leg leveler screws get put in them to support the cabinet. No rusty ones please and thank you.
  4. PurpleActivator

    Help Finding Leg Levelers/Casters for Super Hang-On cabinet with mini bike

    Hi folks! Just got this gorgeous machine yesterday and I'm anxious to get started on giving it a little TLC. First thing is like to get done is get proper casters and feet under this guy so I can stop scuffing up my floors and more easily remove the floor panels to try fine tuning the steering...
  5. 9914ken

    WTB: Sega Outrun Upright - Set of Leg levelers, Pedal Shaft and E Rings and Map Decal

    Hey all, any help on this would be appreciated. Im looking for the following: 1. A set of leg levelers. I tried looking this up or getting a part number. Couldnt find nothing.' 2. Pedal shaft. It is the little tube thingy that holds the pedal into place on the pedal assembly. 3. The E Rings...
  6. Phetishboy

    Looking for 5 New Leg Levelers

    That’s right, I need 5 standard 2” Arcade leg levelers. I need 4 for a new project, and one to round out a set on a current project that I’m working on. Over holiday break, I realized that I had 4 sets of the large leveler plates, but only 3 standard leg levelers in my inventory. I know it...
  7. SIATL

    Sliding leg levelers for my cabinets - 2024

    I'm apologizing in advance as I know this has been beat many times. The majority of the posts are outdated or the parts are NLA. Anyway, I think I am better off with leg levelers with Teflon? as I am currently on carpet and may eventually be on a laminate floor of some type. Any current...
  8. Radford119

    SOLD - PARTS Midway Cocktail Leg Leveler Plates

    4 plates, just sandblasted. Typical pitting, but ready for paint or plating. $35 shipped USPS Priority in CONUS
  9. quickray

    Leg Leveler Plates 2.5 inch

    Looking for at least 2, preferably 4, 2.5 x 2.5 inch by 3/8 leg leveler plates. Seems like everyone only sells 2.75 or 3 inch these days.
  10. quickray

    Dumb Leg Leveler Question

    Dumb question. I’m in the midst of a restore and am replacing the leg levelers, as they’re old and rusted. The manual calls for a pinball leveler. https://www.thepinballwizard.net/cabinet-parts/heavy-duty-3-leg-leveler-with-tightening-nut-silver-chrome/ My question is, does it really matter...
  11. WTB: Bally Midway Wheel holders and Leg Leveler Mounting Plates

    Would need at least 2 pcs. of the Leg Leveler Mounting Plates and 2 pcs. Wheel holders ...No rusty ones please
  12. brmorr

    Anyone have a stash of these Leg Levelers??

    I use these on the games in my basement and have been for quite some time. Games and pinball machines slide great across my pergo floor with them and don't mark anything up. I am getting a little low on them and would like to buy some more. If I remember correctly, these were sold years ago on...
  13. Found or No Longer Wanted WTB: Midway Triangular Leg Leveler Plate

    I need one for a MS pacman I have 3. The 4th was long gone with chunks of the crumbling bottom along with missing wheels. I know these are on a ton of cabinets so hopefully someone saved a few. Can be crusty my remaining 3 are (until I clean them up) I'd post a picture but we still see to be...
  14. Motoman202

    Leg levelers for rough concrete?

    What levelers or slider pads work best for brush finished concrete? I have a few games in my garage and need to move them around from time to time, and they don't really like to slide on this concrete. I have tried the regular steel leg levelers and the Teflon leg levelers. I don't really...
  15. Bee423

    2 1/4" Leg Levelers

    Does anyone sell leg levelers that have a base of 2 1/4 inches? That seems to be the size of the originals that have been on most of my cabinets. Thanks!
  16. demogo

    Stupid leg leveler question

    Hi folks, Just got a new game and is my usual practice, I took the leg levelers off that it came with and replaced them with some that have a slick plastic teflon coating on the bottom so I can slide the cabinet around if needed. This is a no-brainer activity usually; I just tilt the cabinet a...
  17. Motoman202

    These leg levelers?

    Where can I find these leg levelers? I've tried searching and can't find a match. These came off a cocktable I'm sure several tables use these.
  18. Area 51 showcase cabinet leg leveler help

    I recently purchased an Area 51 showcase cabinet which is missing one of the leg leveler as shown below. Need help finding a replacement. Please and thanks!
  19. Joseluis4real

    Street fighter 2 cabinet leg levelers

    Anyone know where I can purchase the bottom corner brackets for the base that already has a Tnut for the leg levelers? I can find them at the hardware store just without the Tnut to screw in the legs.
  20. Brentradio

    FS Parts: New Leg Leveler Rubber Protectors 12 for $22 shipped

    New Leg Leveler Rubber Protectors 12 for $22 shipped
Back
Top Bottom